Godly96_SS_Here

I have a tired rear end in my 93 bird, I know it has 3.23 gears and is a 3 series carrier. But my questions is; I bought a rear from a 01' Camaro, it also has 3.23. Can I just swap what I need to my rear end? or does it not work that way? I am lost here, and dont know if this works. I heard that I have a torsen unit and the 01 is auburn? Can someone shed some light for me?

madhatter

The brake setup is different but adaptable. Also need to know if the donor car is a 3 channel abs (abs sensor on top of pumpkin) or 4 channel abs(sensor on end of each axle.

Godly96_SS_Here

I will check to see for both of those. But I am not trying to put the hole rear end under, just want to swap out the "guts".

camarobird92

It will be 100000000 times easier just to swap out the whole rear. I would just slap it in there and not worry about the ABS.

Z28SORR

http://www.torsen.com/
http://www.auburngear.com/

You could have done this!!!

AL SS590 M6

F-bodies that had LS from 93 thru 98 had Auburn clutch type LS.


F-bodies that had LS from 99 thru 02 had Torsens

The exception to these rules are the SLP cars (SS & Firehawk) could be special ordered with HD Auburns or T2s

Godly96_SS_Here

I suppose i could have, but i picked up a complete rear from an 01' for $40.00 disc to disc! Just seamed like a killer deal, trying to make what i have work.

Jayz Garage

What is the differance between Auburn & Torsens? Can one be put in place of the other IE 2001 rear replacing a 1998 rear giving they are 3 channel,posi, limited slip, similar gears, etc?