brendon444

Recently my transmission has seemed to be slipping under harder than normal acceleration from a dead stop.
What is happening is when i accelerate through first it seems to start slipping at 3000 rpm then rev up to 4000 then slip back down to normal and acelerate fine, only while acelerating in first gear though. Does this mean my transmission is on its way out or is something else that would cause this.
If so how long can i expect it to last just driving it normaly.

CamaroJosh

I'm having the same problem... Everyday i pull out onto a busy road usually half throttle and it will slip to about 4k then drop into gear. Then again i have no problem shifting at full throttle and when im driving it easy. I know nothing about transmissions so i'm hoping someone can tell me as well

Injuneer

Might want to mention the year of the car so we know exactly what kind of tranny your asking about.

Why not add a "signature" with basic info about your car - year, model, engine, tranny and any major mods?

brendon444

Sorry car is a 1994 camaro z28 Auto.

brendon444

ttt need to figure out this problem soon sorry

blown94

stupid question, but have you checked the fluid? It sounds like its running out of fluid. whats the fluid level and condition like? Pink, burnt, brown, black, etc. Truthfully, unless its pink, or just a little brown and just varnished, not smoked and stinky, its going to have to come out and apart.

brendon444

ya the fluid is a varnished brown color

brendon444

Update:
I took the car in to a transmission shop to let the mechanic take it for a drive to see if he could figure out the problem. The car will slip in first and second while taking off hard while in drive or over drive around 3000 rpms. But if you manually select first or second the transmission will not slip while taking off hard. This left the mechanic a little confused. Does anyone here know what could be causing this? Could it be an Electrical problem?

Craddock

Don't wait till it gets worse to fix it. I waited till mine got to just having first and reverse and I'm paying out the *** for it now.

brendon444

Ya im going to get it fixed soon but would like to no if it is something other than needing a rebuild becuase that is pretty expensive. Im asking why would it slip when selected into overdrive or drive while in first and second gear but not when it is manualy selected into first or second it will not slip yet it is still in the same gear.

Craddock

If you go to a reputable shop they'll check for other problems before they rebuild the transmission. When I took mine in they checked for everything else first before they took it apart.

brendon444

ya i have an appointment on tuesday to bring it in i was just wondering if anyone on here would no.

Vince @ FLT

With the condition of the oil a rebuilt is probably your solution.

brendon444

Ya its not as bad as i thought the mechanic looked at it on a white paper and said it looks pretty good was still pinkish.