...Another 3.73/4.11 Question
...Another 3.73/4.11 Question
I took my car to the track the other week and I went though the traps really maxing out 3rd gear. I really didnt want to shift that far down the track, I would like to get through the traps right before I redline 4th. My question is that would 4.11 gears be too much where I would be maxing out 4th, or would I be better off going with 3.73 gears? The car is a 94 T/A M6 w/ a 3.42 rear. Also, would I even notice much of a difference if I were going from 3.42 to a 3.73?
With my current setup 355 ci custom grind cam, 2800, 4.10's, 27" QTP, & 150 shot I was trapping 127 at 6900 RPMs. I'm going to switch to 28x10.5 ET Drags so I can up the shot to 200 or 250 :-)
Jody J.
Jody J.
Thread
Thread Starter
Forum
Replies
Last Post
dluna333
Suspension, Chassis, and Brakes
15
Mar 13, 2015 12:30 PM
jasonduaine
LS1 Based Engine Tech
3
Mar 7, 2015 09:44 AM
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
2
Dec 19, 2014 08:48 PM
Hurin
Suspension, Chassis, and Brakes
4
Dec 13, 2014 07:38 PM



.
.
