I'am going to tune my LT1 OBD1 with tunerpro. I bought a cable from AKMcables.
The engine will get in soon and i want to know what to do first in the tune before i drive it.

Setup
- LT1 396ci
- 6.000 Eagle ESP 3-D H beam connecting rods
- Diamond pistons 9.0:1 with 65cc chamber head
- Splayed caps
- O-ring block
- Custom solid roller cam 252/262 - 630lift 114Lsa
- Lunati vertical bar sollid roller lifters
- Melling M55HV
- Cloyes double roller 9-3145
- Ati Super damper with ATI supercharger Hub
- AFR 210cc LT4 Competition Package Assembly with 65cc chamber
- Procharger P-1SC system
- LT4 Edelbrock Intake
- 58MM TB
- 95lb Delphi injector low impedance
- Versafueler


Now i need your advise, What would you do in the tune
I'am tottaly beginner in tunning, do i have to diable the knock senor because of false knock ?
Please share your opinion!

Thanks

 

You have to disable the knock sensor because of the noise from the solid roller cam. Been there, done that.

 

Is that good for the engine ?