Can anyone give me the part/serial # for the EPROM people are using to socket the OBDI PCMs?

Karl at Xtronics tells me that as long as the EPROM is supported, that I could use two Romutators on a socketed LT1 PCM in order to real-time tune with RT Tuner.

So, I need to find out what EPROM is used when socketing!

Thanks!

 

They are Intel AN28F512 flash chips.

Mike

 

Which is not an EPROM.

 

So what chips are used when they are socketed? Or am I misunderstanding it?

Is there a way to socket it with two EPROM chips?

 

Nope....


The flash chips hold the memory on the PCM. I don't know that you could live edit the values as the PCM only loads these values during boot as far as I understand.

Mike

 

Lt1 PCMs have holes that connect to the flash chip that 2 row header can be soldered to. Craig Moates is working on a way to connect this to his chip emulator so you can tune in real time.