I'm getting a SES light, pluged in my AutoXray and I'm getting a code 22 low voltage TPS, so I replaced the TPS... I've cleared the code from the scanner, by disconmecting the battery and taking the fuses out, and I keep getting the same code, I've gone through 5 TPS's now!! still the same problem, I've checked the wiring and I'm getting the proper volts to the TPS and from the TPS...

Is the computer fried??

I've recently changed the MAF Sensor, MAP Sensor (was getting a MAF error code)

it's a 94 Z28 LT1 with OBD I

Any help would be great!!!!!!!