I was wondering if anyone has a set close to mine, and could give me a guess of about how much horsepower and torque I might be putting out. Here is my set up:

355ci SBC
Holley 750cfm vaccum secondary
Elderbrock RPM performer intake
64cc heads ported with 2.02 and 1.90 valves
flat top pistons 9.7:1 compression
aftermarket headers
dual 2 1/4 exhaust with cross over
semi roller rockers
hydrolic lifters and cam
Rocker Arm Ratio 1.50
cam specs.
Lift: Intake @Cam 305 @Valve 458
Exhaust @ Cam 315 @Valve 473

Cam Timing: TAPPET @.050
Lift: Opens Closes Max Lift Duration
Intake 4 BTDC 42 ABDC 109 226 °
Exhaust 56 BBDC (2) BTDC 119 234 °



Anyone who can offer any advise, I would greatly appreciate you to share.

Thanks,

 

My motor is similar but everything was slightly "bigger" in size, so i'm going to guess... 360hp and 400tq