2nd Gen Mini Tubbing?
04-06-2003, 08:41 PM
#1
Registered User
Thread Starter
Join Date: Feb 2002
Location: Angleton Tx
Posts: 25
2nd Gen Mini Tubbing?
Anyone have pics of a mini tubbed 2nd gen? Interior too.
And, how much room is there to gain by mini tubbing?
Oh yeah, and the sig is wrong...that was a 12.7 @ 109 on 2.56 gears and street tires!
And, how much room is there to gain by mini tubbing?
Oh yeah, and the sig is wrong...that was a 12.7 @ 109 on 2.56 gears and street tires!
04-07-2003, 09:56 AM
#2
Registered User
Join Date: May 2001
Location: Fullerton, CA, USA
Posts: 202
Can't you fit something ridiculous like 315s in a 2nd gen camaro without mods? I was reading a Camaros mag and they were building a road race 2nd gen running 315 A032R Yokohama rubber in the rear, and didn't mention any modifications that were done to facilitate the rubber, sounded like they bolted right up...
04-08-2003, 02:34 AM
#5
Registered User
Join Date: Sep 2002
Location: Sacramento CA
Posts: 589
I know with Torq thrust two, 17x9.5 you'll need about 5.5 bs for the front and 17x11 you'll need 5.7 bs for the back with 315
I'm not sure about the ZR1's. Maybe there the same.
I'm not sure about the ZR1's. Maybe there the same.
Last edited by Johnnynsac; 04-08-2003 at 02:39 AM.
04-08-2003, 09:16 PM
#6
Registered User
Join Date: Jul 2002
Location: White Rock,BC,Canada
Posts: 806
go to www.nastyz28.com and search for backspacing. God knows there have been LOTS of posts about it. And yes you can fit 315s.... but its real tight.
CoryM
CoryM
Thread
Thread Starter
Forum
Replies
Last Post
brothaslide
2016+ Camaro News, Sightings, Pictures, and General Discussion
6
01-09-2016 12:11 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
07-17-2015 02:47 PM