Replacing stock speakers
08-22-2002, 11:25 AM
#3
Registered User
Join Date: Feb 2001
Location: Lexington, Kentucky
Posts: 615
<font face="Verdana, Arial" size="2">Originally posted by Killerjello:
MB Quarts are awesome, almost any model of MB's will sound really good. If you have a bose system though, good luck trying to wire the speakers</font>
MB Quarts are awesome, almost any model of MB's will sound really good. If you have a bose system though, good luck trying to wire the speakers</font>
------------------
Omega9
97 black Camaro coupe 3.8v6 (loaded)
NX Nitrous system(75hp shot)
Bridgestone Potenza 235 55 r16 tires
K&N
GTS carbon fiber blackouts (rear)
GTS smoke blackouts (front)
red neon license plate border
20 limo tint
System: 10" Kicker L7 Solo Baric,Alpine CDA-7893,JBL 1200.1 amp
hot chicks with big ***** option
Dad's Ride
91 white convertable Corvette 6 speed
3 way adjustable suspension
08-22-2002, 01:19 PM
#4
Registered User
Join Date: Jul 2002
Location: SW Chicago
Posts: 550
Best bet is to get a new deck or amp; and run wires to each speaker. Theres really no way to add aftermarket speakers with out doing this. Each speaker is crossed over specifically with the Monsoon. Kinda ****ty..
------------------
A4, GU5, G80, 46k...
K&N Panel, TB Bypass...
2.0 60'
14.0 @ 97
------------------
A4, GU5, G80, 46k...
K&N Panel, TB Bypass...
2.0 60'
14.0 @ 97
08-27-2002, 10:14 AM
#7
Registered User
Join Date: May 2001
Location: Memphis, TN, USA
Posts: 1,122
<font face="Verdana, Arial" size="2">Originally posted by LS1 RULZ:
You won't be able to run the factory Monsoon speakers off of the HU alone. The woofers in a Monsoon system are all run at 2ohms. I haven't seen an HU yet that can handle a 2ohm load.</font>
You won't be able to run the factory Monsoon speakers off of the HU alone. The woofers in a Monsoon system are all run at 2ohms. I haven't seen an HU yet that can handle a 2ohm load.</font>
Oddly enough, the woofers in my T/A WS6 are 4 ohm. They are shot and I was going to replace them with woofers from a Z28 w/ monsoon. The connector was different and the Z28 speakers were 2 ohm.
WTF ???
08-27-2002, 10:26 AM
#8
Registered User
Join Date: Nov 2000
Location: OHIO Go Buckeyes!
Posts: 1,858
<font face="Verdana, Arial" size="2">Originally posted by rncotton:
Oddly enough, the woofers in my T/A WS6 are 4 ohm.
</font>
Oddly enough, the woofers in my T/A WS6 are 4 ohm.
</font>
08-27-2002, 10:16 PM
#10
Registered User
Join Date: Mar 2001
Location: Irvine, CA
Posts: 42
replace everything...trust me. My Infinity Kappas are crystal clear and they fit perfectly.
------------------
96 Z, T-tops,M6,K&N FIPK,HPP+,160*,Borla Cat-back,52mm BBK TB, TB by-pass,Edelbrock shorty headers,Granatelli MAF,Accel Extreme wires,NGK TR55's,FireBall Coil
92 ZX-7
Audio:
Alpine Head Unit, MP3
Hifonics Z700 amp
Infinity Kappa 6.75" 2-ways
SPL 10 in MTX Thndrfrm stealth bx
Kenwood KDC-C565FM 10 disc changer
Optima Yellow top
------------------
96 Z, T-tops,M6,K&N FIPK,HPP+,160*,Borla Cat-back,52mm BBK TB, TB by-pass,Edelbrock shorty headers,Granatelli MAF,Accel Extreme wires,NGK TR55's,FireBall Coil
92 ZX-7
Audio:
Alpine Head Unit, MP3
Hifonics Z700 amp
Infinity Kappa 6.75" 2-ways
SPL 10 in MTX Thndrfrm stealth bx
Kenwood KDC-C565FM 10 disc changer
Optima Yellow top
Thread
Thread Starter
Forum
Replies
Last Post