I am replacing the right front midbase of the component system in the door of my 98 TA converible. The wire colors are red and black/red. Anyone know for sure which is positive or negative?

 

http://www.installdr.com the site should have the wire codes.

------------------
1997 Camaro Z-28 SS #0728

Flowmaster, Hooker Header tips, BMR strut tower brace, lower control arm and relocation bracket, Optima Yellow Top battery, Granatelli lowering springs, KYB AGX shocks, Lakewood panhard rod, Bear bump steer, 17 x 9.5 Z06 rims

Audio/Video:
Head Unit ----- Pioneer AVX-P7000CD
Master Unit --- Pioneer AVM-P9000R
DVD Player ---- Pioneer XDV-P9

Front --- Focal Polykevlar 165K2 w/ TN-51 tweeters
Rear ---- Focal Polykevlar 165K2
Sub ----- Lightning Audio 10.2.4
Amp ----- Phoenix Gold XS6600

My SS homepage
CAR AUDIO PLANET
Georgia F-Body Association

 

I already looked there and for 90 and up GM it says the left front wire are light grey and tan. Mine, at least to the 6 1/2 are red and black/red.

 

if it follows the usual coloring code, red is positive and black is neg. Are those the factory wire or is it spliced on to the factory wiring? If the same wires go through all the way thru the door, then you may have to just track it down back to the HU.

 

I answered my own question if anyone else is interested. The red and red/black wires come out of the factory crossover to the mid bass. Using a D Cell battery I verified the red is + and red/black is -. This is on the left front anyway.

 

that's cool. I should have said something before, but I thought that was the factory wiring and I can't assume that red is positive and vice versa.