Ok so it hit me finnally today my 84 v6 camaro needs work not to bad on the engine stuff. But the engine needs work especially before it's back to it's prime. So I ran some numbers and finnally realize for all of what I was planning to do with the carbed v6 I coulda completed a 350 in the same amout of time for a fraction of the cost. At the smae time get a even larger hp gain. So here's my question cna you guys tell me speciaficlly what I need to buy to do the swap and some ruff numbers as to what the total swap will cost being it that I'm doing alot if not all of teh work myself. Well not absalutely by my-self my friends dad aka 60something year old hotrod god is gonna help me a little along the way. But before I even turn a wrench I need to write out what it is I'm doing what order to do it in and how much it will cost. Can you guys help me out in anyway ?

~Blackbob~

------------------
AOL AIM: koingracer
Yahoo: japracer02
MSN: lowerdford@hotmail.com
It's all about doing the speedlimit..................sideways !

 

Since you are looking at a 3rd Gen application, you would probably get the best results by posting this question on the "3rd Gen Tech" board.

Moving it there.......

------------------
Fred
94 Formula A3+1: 381/TH400+OD/N2O

Advanced Tech Posting Guidelines
Detailed Mod's List
11.513@115.59 on motor; 11.162@127.67, 1.643 60' on a 125-shot. Going with a 275-shot this year