another SB2 question :)
Thread Starter
Registered User
Joined: Oct 1999
Posts: 100
From: Waukesha, WI USA
another SB2 question :)
simple one this time....
for the SB2.2 heads, am i gonna have to have custom headers made? or can i just buy like the FLP's or Hooker LT's for an LT1 motor and it would work? Slight modifications to the primaries possibly to match up? thanks
Chris
for the SB2.2 heads, am i gonna have to have custom headers made? or can i just buy like the FLP's or Hooker LT's for an LT1 motor and it would work? Slight modifications to the primaries possibly to match up? thanks
Chris
Registered User
Joined: Aug 2000
Posts: 556
From: Chicago, IL
the flange would need to be changed and a good welding/fabrication shop can do that for you buts pointless because you are going to need a larger primary header than what FLPs/Hookers offer if you plan to go as big of inches as you plan...
probably going to need 1 7/8" stepped to 2" or possibly even a full 2" if you plan to spray a lot
probably going to need 1 7/8" stepped to 2" or possibly even a full 2" if you plan to spray a lot
Thread Starter
Registered User
Joined: Oct 1999
Posts: 100
From: Waukesha, WI USA
<font face="Verdana, Arial" size="2">Originally posted by 89ProchargedROC:
the flange would need to be changed and a good welding/fabrication shop can do that for you buts pointless because you are going to need a larger primary header than what FLPs/Hookers offer if you plan to go as big of inches as you plan...
probably going to need 1 7/8" stepped to 2" or possibly even a full 2" if you plan to spray a lot</font>
the flange would need to be changed and a good welding/fabrication shop can do that for you buts pointless because you are going to need a larger primary header than what FLPs/Hookers offer if you plan to go as big of inches as you plan...
probably going to need 1 7/8" stepped to 2" or possibly even a full 2" if you plan to spray a lot</font>
thanks for the reminder!!!
Thread
Thread Starter
Forum
Replies
Last Post
dluna333
Suspension, Chassis, and Brakes
15
Mar 13, 2015 12:30 PM
jasonduaine
LS1 Based Engine Tech
3
Mar 7, 2015 09:44 AM
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
2
Dec 19, 2014 08:48 PM
Hurin
Suspension, Chassis, and Brakes
4
Dec 13, 2014 07:38 PM
