3rd Gen / L98 Engine Tech 1982 - 1992 Engine Related

Missing and Cutting out at 2000RPM

Thread Tools
 
Search this Thread
 
Old Sep 20, 2006 | 09:52 PM
  #1  
rainfly's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 2
Missing and Cutting out at 2000RPM

Looking for a cause to my engine missing at around 2000rpm and up. The engine runs great at all RPM's until it reaches about 200 deg. and then it will miss and cuts out at about 2000 and up. It will not die but is really jerky. The power is on...off...on etc. If I give it full throttle the engine will serge back to life like I am giving it full throttle. Below 2k it runs smooth and idles great. This is also an intermittent problem. Check engine light does not come on. TBS?

88 TBI 350

Last edited by rainfly; Sep 20, 2006 at 10:24 PM.
Old Sep 21, 2006 | 12:06 AM
  #2  
IOWZ28's Avatar
Registered User
 
Joined: Sep 2006
Posts: 6
From: Isle of Wight, UK
Re: Missing and Cutting out at 2000RPM

Somthing on the ignition breaking down, distributor cap, rotor arm, leads and plugs. thats your basic stuff. try pulling codes and see what you get
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KYWes
LT1 Based Engine Tech
8
Jun 14, 2022 06:52 AM
ducttape1975
Classic Engine Tech
2
Mar 26, 2016 04:17 PM
94Form
LT1 Based Engine Tech
12
Jul 17, 2015 10:56 PM
asilomar244
LT1 Based Engine Tech
17
Jul 12, 2015 05:53 AM
ducttape1975
New Member Introduction
2
Jul 10, 2015 06:29 PM




All times are GMT -5. The time now is 01:56 PM.