ANYBODY GOT A GOOD MAF SENSOR TO SELL ?????? E-MAIL ME !!!!!!!!!! MEL

 

They didnt make aftermarket mass air flow sensors for thirdgens did they? If so then where did you find them, ive been looking for years trying to find mass air sensors. I finally just converted speed density. Good luck finding one though.

BTW: I live in Hoffman Estates, what car do you drive i cruz threw elgin alot. later
Bobby

 

HEY BOB, I'VE GOT A BLACK Z CONVERT !! I LIVE ON WEST CHICAGO ST. , A COUPLE OF BLOCKS EAST OF MCCLEAN BLVD. I DON'T KNOW ABOUT AFTER MARKET, I JUST NEED ONE TO PASS EMISSIONS !!! F-BODY PICNIC AROUND NOON SAT. ON SHOE FACTORY ROAD AT A PICNIC SITE OF SOME KIND !!! SHOULDN'T BE HARD TO FIND !!!! MEL

 

Hi guys! We're neighbors, I live in Schaumburg! I just came across your posts by accident. If I have time I'll try to find that F-body picnic Sat. See ya. Jim.

 

Aftermarket MAF made by WELLS MFG p/n SU-145
and costs about $170 with a lifetime warranty. Out flows a descreened MAF and uses a film element instead of the hot wire.

 

WHO SELLS THIS WELLS MFG MAF ??? I RAN A SEARCH BUT COULDN'T FIND THEM !!!! MEL

 

89 DT
Try this for the WELLS MAF:
WORLD DISCOUNTS
BUFFLO, NY
1 800 288 6728
P/N SU-145

------------------
1987 Black Camaro IROC-Z (original owner)Replaced LB9 @ 86100 miles.
New 350 Crate Engine
Balanced & Blueprinted
World Prod SR 67cc Heads 9.6:1 C.R.
Cam 454lift,216dur@50,110ls
TPI Induction(from 305)Hi-Flow Wells MAF.
22# Fuel Injectors
AFPR @45 psi & Gage
SLP Intake Runners
Fastchip Stage 2 chip
K&N Filters and Airfoil
Hotchkis STB
SLP 1 3/4 Headers
3" CATCO Catalytic conv.
SLP 3" Catback Exhaust
700R4 Auto
SLP Torque Converter(2400 stall)
1LE Aluminum Dr Shaft
Spohn Perf. rear LCA's & Panhard Bar
1989 B-W 9 bolt Limited slip 2:77 Rear
Four wheel Disc Brakes
10.5 F & 11.655 PBR R
17x8.5 ATI 5 Razze Wheels
245/45/ZR17 Tires
New DYNO RESULTS:
215 RWHP & 287 RWTQ
276 HP & 368#/ft at FLYWHEEL with all Emission controls installed.
13.74 @ 96.781
A DAILY DRIVER