G-Force T-5???
There was an article in one of the magazines about that before, but if I remember correctly, they mumbled something about the synchronized T5 costing as much or more as a T56, and still not being as strong. I should see if I can find it. I remember getting my hopes up, but by the end of the article I was pretty deflated.
It would only cost me the 950 because I would build it myself. I just finished rebuilding my STOCK T-5 last night, so it it wouldnt be a problem for me to beef it up with their parts. Where did you see this article at?
Last edited by JAYDUBB; Apr 24, 2003 at 03:30 PM.
Jim,
could you find that info, their site states 500lb/ft, that is equal to what at t56, for $950 and a weekend of my time, it is very worth it to me if i can handle that kind of torque and i can still use my centerfoce clutch. and torque arm x-member ect.
could you find that info, their site states 500lb/ft, that is equal to what at t56, for $950 and a weekend of my time, it is very worth it to me if i can handle that kind of torque and i can still use my centerfoce clutch. and torque arm x-member ect.
Jim! Where is the info at dude? Show me the article!
Hey Dewey.. Didnt know you came here too!
Knowing G-Force, the 500 lb/ft rating is probably on the conservative side. The first tech I talked to said they have one in a car that goes 9's, and the second tech said 10's. So, if your goal is sub-11's, then this tranny/tranny kit has plenty of reserve and is WELL WORTH IT IMHO. I WILL have this kit in the summer, even if I dont install it yet!
Hey Dewey.. Didnt know you came here too!
Knowing G-Force, the 500 lb/ft rating is probably on the conservative side. The first tech I talked to said they have one in a car that goes 9's, and the second tech said 10's. So, if your goal is sub-11's, then this tranny/tranny kit has plenty of reserve and is WELL WORTH IT IMHO. I WILL have this kit in the summer, even if I dont install it yet!
Originally posted by 84Z
Dewey,
I have the article saved and could send it to you in a zip file if you would like
Sorry, it's not the article. It's the specs and info from G Force
Dewey,
I have the article saved and could send it to you in a zip file if you would like
Sorry, it's not the article. It's the specs and info from G Force
Originally posted by 84Z
Jaydubb, I tried to email and it bounced back
Jaydubb, I tried to email and it bounced back
Hey guys... Theres added info on that first link. You guys might wanna check into it!!!
Click here and see the latest updates!!!
Click here and see the latest updates!!!
Jim, when you do find it could you please send it.
dewey_316@hotmail.com
dewey316@3rdgen.org
or if neither of those will take the attachment, send it to me at work:
john.dewey@transcore.com
Jay,
i am everywhere
if it is about f-bodies, i am a member. i usualy only check over here every couple of days, but i am here none the less.
dewey_316@hotmail.com
dewey316@3rdgen.org
or if neither of those will take the attachment, send it to me at work:
john.dewey@transcore.com
Jay,
i am everywhere
if it is about f-bodies, i am a member. i usualy only check over here every couple of days, but i am here none the less.
Thread
Thread Starter
Forum
Replies
Last Post
firechicken_3
3rd Gen / L98 Engine Tech
5
Jun 26, 2002 03:25 AM



