Ok i just bought a set of 2.02 head 60cc champer my car will make 10.5 to 1 what cam whould u guys suggest. Once again money is no object

 

sry ...the car will turn 6grand

 

Roller or flat tappet?

 

Roller

 

comp extreme 110LSA .50 236 242 ........520 540
Ive got the part number if you need it. Its a pretty nasty cam. Thats with 1.5. If you 1.6 rockers it will bump the lift to like ...576.

 

my 2.02 heads dont have screw in studs can i still use roller rockers

 

Sure...I used them on my car in the past. They were press in.

 

If you get to nasty of a cam.... you should take your heads in and have them machined for screw in studs. It doesnt cost that much. Maybe 100 bones with studs.

 

so i need guide plates rite

 

What kind of heads do you have? What are the specs?

 

If you go with roller rockers you'll either need to get guide plates and hardened pushrods or buy the "self aligning" rockers which cost quite a bit more. Since you're changing the heads anyway I'd go ahead and get screw in studs just so I'd know they won't ever pull out, but that's just me.