Need wheelbase info to load 94 Z on trailer

Hello,

I need to verify the info I got on the wheelbase for a 94 Camaro. I was told it is 101" center to center.

Can anyone else please confirm that and give me the dimension from the center of the wheel to the outter most point on the front and rear bumpers?

The problem is I have a trailer with a large box on the front and it was tight with a 3rd gen firebird, the bumper kissed the box.

Thanks,

We used a 18' trailer, 2' of that is dove tail, so 16' is plenty and it leaves room at the front and rear...

Thanks for the info on that. My concern is that I have about 36" from where the front wheel on the car is tied down to the trailer to the storage box on the front of the trailer. I am good on length.

The trailer is usually used for a vintage racecar that has not much past the front wheel.

I would be concerned on width too. We can barely open the doors due to the fenders on the trailer.

Best thing to do is measure it or put it on the trailer.

Yeah, that's my problem though... I know the width will be good. The problem is that the parts car is about 5 hours from here and my camaro is in storage. I won't know till I get down there with the trailer I am borrowing...

*L* Hopefully it'll fit, worse comes to worse, I squash the nose since it's cracked anyways.