I just bought my 95 Z28 and want to put the ZR1 style wheels on it. I was wanting to know where i could find these wheels and if they will fit or not. i want 17x9.5's up front and 17x11's in the rear. I've found one website that has them but i don't know if the offset is correct for them to fit inside the fender wells. Does anyone know where i can find these and if they will fit? How much do you think i'm looking at for just the wheels?? And they're going to be chrome. Any info would be great!

 

Get the ones with the 50mm offset. Mine rub a little, but I need to do some things and they will quit.

 

You want 17x9.5 56mm offset front, 17x11 50mm in the back.

I'd guess about 50% of the 4th Gens have problems with the 17x11's rubbing the inside fender liner, particularly if you put one of the "wider" 315 tires on thrm. The changes SOME people have to make is hammering the inner fender liners, cutting the projecting edge off the jounce bumper bracket, and possibly recentering the body over the rear axle with an adjustable panhard rod.

You might want to try a "search".... this question gets asked a lot, and I know I've posted photos and other information regarding the install.

 

I'm running the same offsets as above on my 98,no issues at all