Will this work
Thread Starter
Registered User
Joined: Jan 2006
Posts: 903
From: Fort Worth, TX
Will this work
18x9.5: Offset: +65mm Backspace: 7 7/8 inch - Rears
17x8.5: Offset: +58mm Backspace: 7 1/8 inch - Fronts
Rims are the C6's
Will that offset work
17x8.5: Offset: +58mm Backspace: 7 1/8 inch - Fronts
Rims are the C6's
Will that offset work
Last edited by Moshbmx1; Aug 7, 2006 at 03:39 PM.
Administrator
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
Re: Will this work
Works, but the wheels will be fairly deep in the wheel wells. Fronts will be 1/4" farther out than the stock wheels, rears will be less than 1/2" farther out than the stock wheels. Neither will stick out as far as say a stock WS6 or SS wheel.
The rears my be deep enough that with a fat tire, some minor inner fender hammering may be required.
The rears my be deep enough that with a fat tire, some minor inner fender hammering may be required.
Thread
Thread Starter
Forum
Replies
Last Post
squarehead
General 1967-2002 F-Body Tech
7
Jan 15, 2015 07:02 PM