Will these wheels fit?
Re: Will these wheels fit?
The bolt circle will match. Putting some newer wheels on "older" 4th Gens (pre 97), the rear wheel will not fit over the over-size hub on the rear axle. If that happens, the fix is to lightly sand the inside daimeter of the hole in the rear wheels.
The 00 to 02 C5 wheels are generally:
18 x 9.5" 65mm offset
17 x 8.5" 56mm offset.
That is "OK" on a 4th Gen. The front wheel will sort of sit where a stock 17 x 9 (WS6/SS) wheel will sit. The rear wheel will have all the added width (1/2") added at the back of the wheel. Could be about a 7.60" backspace, which will be a little closer to the inner fender liners. Shouldn't rub unless you put excessively wide tires on it or have the car lowered quite a bit.
The 00 to 02 C5 wheels are generally:
18 x 9.5" 65mm offset
17 x 8.5" 56mm offset.
That is "OK" on a 4th Gen. The front wheel will sort of sit where a stock 17 x 9 (WS6/SS) wheel will sit. The rear wheel will have all the added width (1/2") added at the back of the wheel. Could be about a 7.60" backspace, which will be a little closer to the inner fender liners. Shouldn't rub unless you put excessively wide tires on it or have the car lowered quite a bit.
Re: Will these wheels fit?
Originally Posted by SantaCruz163
Yes or No, will these wheels fit on a 95 T/A?
http://www.cardomain.com/memberpage/630092
Thread
Thread Starter
Forum
Replies
Last Post
mschmidt33
General 1967-2002 F-Body Tech
7
Mar 15, 2015 07:20 PM
Moshbmx1
Parts For Sale
1
Jan 20, 2015 03:27 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 4, 2014 11:56 AM



