FOR SALE: Every thing is OBO so make me some offers!!


--Hooker Super comp Long tube headers:
Jet Hot coated, with O2 bungs, no EGR or AIR fittings. Includes y-pipe, the y-pipe is a Flowmaster Y with mild steel bent and welded to match up to the headers. I’ll also include new O2 extensions, Felpro 1406 gaskets, and ARP 3/8th headed S/S bolts.

The headers have some cosmetic damage nothing that would effect performance, consider them pre-clearanced for every day driving, there were on my car for 3 years, so like I said they do have some damage on them, pics available upon request.

$475.00 OBO


--JE 4.030 Forged Flat Top pistons, with wrist pin located for a 3.875 (396) crank: SOLD
About 3k miles on them, look perfect, no detonation, pin bushings on the rods are perfect. Can include with eagle 6” rods with ARP bolts, rods and bolts have been clearanced for cam.

Specs: 4.030 bore, -5cc reliefs, floating pins with spiro locks, pins included, 12:1 CR with my 57cc heads, 0 deck, .039 felpro gaskets.

$500.00 OBO Pistons and rods
$300.00 OBO w/o rods
$300.00 OBO for just the rods


--Eagle 4340 3.875 stroke crank SOLD
About 3k miles on it, looks perfect, no problems in my motor, it is balanced to the 4.030 pistons and 6” rods above, I will sell them as a package or separate.

$1000.00 OBO fully balanced rotating assembly
$600.00 OBO for just the crank


--Eagle 6” 4340 forged connecting rods: SOLD

Same as above, I have two sets, both clearanced for cam, with ARP bolts.

$300.00 OBO per set
$500.00 OBO for both


--Ross 4.050 Forged pistons with pins located for 3.875 crank, makes 401 CI: SOLD(Pending recipt of payment)

Flat top, off set reliefs -8cc I believe, some have minor nicks on the top edges of pistons, that need to be polished out by a shop.

Specs: 4.050 bore, -8cc I think reliefs, floating pins, pins not included, ~12:1 CR as above.

$200.00 OBO


--Solid roller valve train:
Crane 11528 solid lifters, 7.950 Trick Flow chromoly push rods, I have two cams, one is a Lunati 248/252 .663/.666 110LS, the other I have to get the specs on but it is a F.I. cam 27x/28x duration, I will get full specs for anyone interested. I will sell with both cams or your choice of cams. Can also include a set of 1.65 wide-body Harlen Sharpe rockers for an additional $150.00

$500.00 OBO w/o rockers and one cam
$650.00 OBO w/ both cams no rockers
$900.00 OBO for everything


--MOROSO cold air intake w/ filter Pending Sale

$135.00 OBO


--New 10-spoke SS wheels Silver:Pending Sale
New off a 2002 SS, perfect condition, no scratches, no tires, center caps included, Pics available upon request.

$475.00 OBO


--Two chrome ZR1 wheels SOLD
In good shape, couple scratches on the lip, 9.5” rims, with chrome center caps

$200.00 OBO for both


--Stock seats out of a 94 formula Pending Sale
Perfect except for one minor cig burn, but not very noticeable.

$300.00 OBO


--Firebird/TA/Formula drivers front fender
Plastic unpainted.

$100.00 OBO



--MSD/Accell 38#/hr fuel injectors
Run for about 3k miles only had about 500 on them when I got them, work fine. Can sell with stock fuel rails for an extra $100.00

$200.00 OBO
$300.00 w/ stock fuel rails


--Stock A-arms, K-member, rear sway bar (2), Pan hard rod(2), Torque arm, front sway bar, rear LCAs, stock shocks with 10k miles, stock springs with 10k miles, may have other stuff just ask, and I will take a look.

$250.00 for the whole lot or make offers on individual stuff


--Stock rear seats, one set from a Camaro, one set leather from a TA
Graphite leather rear seats from a TA SOLD
Two tone grey cloth seats from a Camaro

$100.00 OBO per set


NEW Stuff!!

[b]
--Comp Cams Pacaloy 943 Valve springs
These are the best soild roller valve springs you can buy, run for about 1500 miles, they seat out at about 210 # closed. Come with titanium retainers, chromoly locks, and seats. I'll sell them with the above soild roller setup.

$300.00 OBO for the spring/seats/locks/retainers
$1100.00 OBO with the soild roller setup


--BBK 58mm Throttle Body
Like new, polished IAC passages so it doesnt whistle

$250.00 OBO


--93 Z28 A4 Bone Stock
Black, new tires, 98k miles, paint is alittle rough it got keyed in my driveway, but am going to have it wet sanded and will probably take out the majority of them, I am replacing the interior with newer white guages, in stead of the yellow ones that came in 93. Runs perfect.

I will combine with any of the above mods, headers, CAI, wheels ect.. and I’ll make you a deal on packages.

$4500.00 OBO


Make offers on anything as packages, or separate.

Thanks
Patrick

 

maybe interested in the 10 spoke's, and the headers. but i may need a couple weeks to get the money. unless your willing to trade?

 

Whatcha got? The headers are now pending sale, bnut the 10 spokes I think are still available.

Thanks
Patrick

 

i have a lt1 but i'd like to keep the heads. it does have 1 broke rod, i didn't blow it, it was at idle and broke??? and have pretty much anything for older gm. if you need anything. i have running sbc(one with less than 50mi. i was building a toy then bought my z28 so i sold the nova and kept the engine and trans.) have 3 sbc that needs work, 1 has a stck ring, 1 was on a truck with a bad crab, flooded washed the rings and started smoking a little but ran good(mr. goodrich engine), 1 with #7 rod knocking a little. turbo 350 trans. few 3rd gen rears, and front suspention. have some 2nd gen stuff have to look to see what. have 4wd parts. have 2 sets of tbi heads for late 80's early 90's sbc. wheels off my car(after i get new ones ultr platinum tri stars chrome)

if nothing interest you let me know what you need i may have it, or know were to get it.

 

Dont really want to trade, but the headers are back up for sale the deal fell through, if you are interested email me carter1pat@yahoo.com

Thanks
Patirick

 

Viperkiller the headers fell through if you are still interested in them?

TTT

Patrick

 

the headers were actually for a freind, he decided to go with jet hot.

i would be interested in the wheels, but i would need a couple weeks to get the $$. i'm not broke, just had to spend a lot of money on the tranny and rear.

if the wheels are still available would you take 400
you location says dallas, i could pick up.

 

The wheels are no longer available, and the headers are Jet Hot coated.

Thanks
Patrick

 

TTT, for those who may have missed it

Thanks
Patrick