FS: LT1 stuff
Thread Starter
Registered User
Joined: Oct 2001
Posts: 553
From: Greenville Tx Us
FS: LT1 stuff
All prices are best offer.
Hooker Long tubes uncoated with o2 bungs = SOLD
BBK 52mm TB, ported a little = SOLD
Brand new never used CSI Electric water pump on a housing SOLD
Spec Aluminum flywheel, not too many miles, but has hot spots you can buy a new mating surface for about $60 = $250
Aeromotive AFPR diaphram is busted $40 to fix it = $50
Shortblock, spun rod bearing everything is there: front cover, cam is the comp 236/242 i forgot the lift, somewhere on the side of the 306, on a 111 LSA $300 obo
Heads if anyone is interested. Stock ported. Never got them flowed. The car made 399 RWHP on a wore out bottom end and the 306. Felt the same with the cam that is in there now, just never got it dynoed. Has 7/16th studs, isky adjustable guide plates, comp 987 outer springs with some Lunati inners, pretty stout, 10 degree locks and retainers. Probably needs a valve job. Has maybe 10k miles on the heads right now. $600
LT4 hotcam only. Couple of surface rust spots, but will clean up = $125
I know I have some other stuff, just have to get to it. I'll try to get some pictures if anyone is interested.
I need some LS1 stuff. Will consider trade, need idler pulleys, a/c stuff, mounting brackets for the accessories, motor mounts, Kmember, any performance stuff. Starter, bellhousing. Let me know what you've got.
Hooker Long tubes uncoated with o2 bungs = SOLD
BBK 52mm TB, ported a little = SOLD
Brand new never used CSI Electric water pump on a housing SOLD
Spec Aluminum flywheel, not too many miles, but has hot spots you can buy a new mating surface for about $60 = $250
Aeromotive AFPR diaphram is busted $40 to fix it = $50
Shortblock, spun rod bearing everything is there: front cover, cam is the comp 236/242 i forgot the lift, somewhere on the side of the 306, on a 111 LSA $300 obo
Heads if anyone is interested. Stock ported. Never got them flowed. The car made 399 RWHP on a wore out bottom end and the 306. Felt the same with the cam that is in there now, just never got it dynoed. Has 7/16th studs, isky adjustable guide plates, comp 987 outer springs with some Lunati inners, pretty stout, 10 degree locks and retainers. Probably needs a valve job. Has maybe 10k miles on the heads right now. $600
LT4 hotcam only. Couple of surface rust spots, but will clean up = $125
I know I have some other stuff, just have to get to it. I'll try to get some pictures if anyone is interested.
I need some LS1 stuff. Will consider trade, need idler pulleys, a/c stuff, mounting brackets for the accessories, motor mounts, Kmember, any performance stuff. Starter, bellhousing. Let me know what you've got.
Last edited by whitehooptie; Feb 4, 2007 at 12:09 PM.
Thread Starter
Registered User
Joined: Oct 2001
Posts: 553
From: Greenville Tx Us
I'll go to my dealership and see if they have more. If they do, I'll buy one and ship it to you. No extra, just what I paid for it and shipping. I'll let you know tomorrow. Now by the side of the block you mean the driver side cylinder head correct?
Thread
Thread Starter
Forum
Replies
Last Post