FS: Heads, Cam, Converter, Headers, Pulley, Ecutout, Thermo, FAST90, and Pushrods
Thread Starter
Registered User
Joined: Apr 2001
Posts: 89
From: houston
FS: Heads, Cam, Converter, Headers, Pulley, Ecutout, Thermo, FAST90, and Pushrods
All prices are listed obo + shipping costs from Houston.
TSP PRC 5.3L Stage 2.5 LS1 Heads $850
FLP LoongTube Headers with custom 3" ypipe, 3.5" FlowMaster collector, and 3.5" cutout $500
(Not willing to ship. Ypipe is custom and only fits these headers to my knowledge)
DMH Electric Cutout 3.5" $100
Hypertech 160* Thermostat $45
Vigilante 3600 Stall Converter $500
Torquer V2 Cam on 113lsa $280
LME Ported Fast 90mm Intake $950
A small crack in one of the vaccum fitting has been repaired with epoxy. It is strong enough to swing the intake around by this fitting so I would not hesitate to use it as is.
Aftermarket Crank Pulley $120
I belive it is a March pulley. I also have the belts.
7.4" Hardened Crhomeoly Pushrods from TSP $70
You will need these with the 5.3L heads.
TSP PRC 5.3L Stage 2.5 LS1 Heads $850
FLP LoongTube Headers with custom 3" ypipe, 3.5" FlowMaster collector, and 3.5" cutout $500
(Not willing to ship. Ypipe is custom and only fits these headers to my knowledge)
DMH Electric Cutout 3.5" $100
Hypertech 160* Thermostat $45
Vigilante 3600 Stall Converter $500
Torquer V2 Cam on 113lsa $280
LME Ported Fast 90mm Intake $950
A small crack in one of the vaccum fitting has been repaired with epoxy. It is strong enough to swing the intake around by this fitting so I would not hesitate to use it as is.
Aftermarket Crank Pulley $120
I belive it is a March pulley. I also have the belts.
7.4" Hardened Crhomeoly Pushrods from TSP $70
You will need these with the 5.3L heads.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM