http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7922452348&catego ry=38634
Check it out, $700 and brand freakin new. That's a fraction of what it was new years ago.
I don't see any way for the blower to work with SFI, I think it will only work carb and TBI. So if you bought it you would have to convert.
B&M made these a long, long time ago I rarely see them on ebay.
The only compairable one that is made to day is made in canida and it is $4000 for the basic kit.

 

if i had a 3rd gen i'd be all over this

 

It will fit any 60*-V6 all 2.8, 3.1 and 3.4 engines.
But to make it work in any post 1984 camaro you will need to change your car over to a carb or TBI set up.

 

Check this link link when the ebay link goes cold.
thirdgen.org
Here are pictures that will be around a while.

 

yeah , too much work and money for me to deveote to it considering im gonna be going with a set of almunium heads someday :looks at calandar:

 

Check RSM.com for a blower for 3.4l Camaro I will be running my blown 3.4 at the track tomorrow

 

i beg you to inform us of your times, i have yet to see any out put from a car with that blower, im very interested in how much it helps

 

Blower times are as follows traction big problem tried to load it up at the line and spun the tires bad
Just feathering it off of the line 15.072 @ 89.15mph there is lots to be hadas the 60ft times are 2.1- 2.2.
The previous runs with headers and intake were 16.8 @ 80 mph
I'm going to the dyno on Wed so I will post the numbers when I get them