dyno numbers
Registered User
Joined: Jun 2000
Posts: 190
From: Chatsworth, CA
Re: anyone else have dyno numbers
Originally posted by red95camaro
I was just wondering if anyone else had dyno numbers from a 3.4 to compare with I know they aren't earth shaking but there was a 99 mustang 3.8l and he only dynoed 142 I think they were 190 at the crank so my car with mods isn't that bad?
I was just wondering if anyone else had dyno numbers from a 3.4 to compare with I know they aren't earth shaking but there was a 99 mustang 3.8l and he only dynoed 142 I think they were 190 at the crank so my car with mods isn't that bad?
1994 3.4L Black 5spd Camaro w/90k miles on the odo, 1/2" of crank walk and a misfire, as well as a slipping clutch:
2.25->3" Flowmaster Catback
Accel U-groove plugs gapped .045
Accel 8.8mm Wires
LSD w/3.23 Gears
ported/polished TB (but not intake)
140.2 hp @ 4500 rpm
183.6 tq @ 3500 rpm
thats at the rear wheels tho. if you wanna change that over, just add back the 15% loss the drivetrain makes:
164.94 hp @ 4500 rpm
216 tq @ 3500 rpm
(i like that extra 16 tq heheh
)you can check it out here: http://camaro.adwire.com/dyno1.jpg
thats with the stock manifolds and stock intake, stock ECM (no computer program) and a lot of wear and tear on the car. cant wait to see what she does after i finish the swap im doin :-D (stickin with the 3.4 - changing to aluminum heads and 3100 intake, 3400 intake to come soon.)
-R
Thread
Thread Starter
Forum
Replies
Last Post
racecarz28
General 1967-2002 F-Body Tech
2
Mar 30, 2015 09:55 PM
Joe Brodman
Drag Racing Technique
5
Jul 24, 2002 05:24 AM