cam install?
Registered User
Joined: Sep 2001
Posts: 159
From: Sunrise, Florida
Id really suggest if your gonna install a cam then you might as well do the upper and lower intakes and heads also. A guy that is doing my car is charging me $1,800 to P&P my heads and intakes . He is also taking the cam in my car and grinding it to the specs I want . Hes doing everything to my engine but touching my pistons. $1,800 including labor .
But any way about your cam install . I have heard it could be $ 500 for just a cam install . But im not totally sure.
But any way about your cam install . I have heard it could be $ 500 for just a cam install . But im not totally sure.
Registered User
Joined: May 2002
Posts: 393
From: niagara falls ny
ok
pulling both intakes, valve covers
removing radiator
removing some accories on the front of the engine
and the water pump
taking off rockers and pushrods
and then lifting out all the lifters and then removing and installing the cam
thats about it maybe a little more also its very early and i dont think good at this time of day
pulling both intakes, valve covers
removing radiator
removing some accories on the front of the engine
and the water pump
taking off rockers and pushrods
and then lifting out all the lifters and then removing and installing the cam
thats about it maybe a little more also its very early and i dont think good at this time of day
Registered User
Joined: May 2002
Posts: 805
From: san anto, tx
Originally posted by Ryan94V6
Id really suggest if your gonna install a cam then you might as well do the upper and lower intakes and heads also. A guy that is doing my car is charging me $1,800 to P&P my heads and intakes . He is also taking the cam in my car and grinding it to the specs I want . Hes doing everything to my engine but touching my pistons. $1,800 including labor .
But any way about your cam install . I have heard it could be $ 500 for just a cam install . But im not totally sure.
Id really suggest if your gonna install a cam then you might as well do the upper and lower intakes and heads also. A guy that is doing my car is charging me $1,800 to P&P my heads and intakes . He is also taking the cam in my car and grinding it to the specs I want . Hes doing everything to my engine but touching my pistons. $1,800 including labor .
But any way about your cam install . I have heard it could be $ 500 for just a cam install . But im not totally sure.
thats a hell of a deal! what times at the track are you expecting when that is all done?
Thread
Thread Starter
Forum
Replies
Last Post
F(ast)-body
LT1 Based Engine Tech
8
Feb 26, 2003 09:05 AM