stevesport47

I'm trying to replace a water pump on a 94 v6 3.4L and I seem to have run into a problem with removing the power steering pump bracket. I've pulled 2 bolts but there is a 3rd one behind the electronic distributor assembly. Does anyone have any tricks on getting the pump out without pulling this bracket? Any tips on getting the bracket off? Any help would be most appreciated. Either reply to this thread or send me an email. stevesport@verizon.net

FunkZ

You have to pull all 3 coil packs and the ICM bracket to get to those bolts. There's another 2 bolts or so down on the side of the block.

black95maro

yea you need to pull the packs and the ps pump. go check out auto zones website they have a guide with pics for just about everything. pretty nifty