3.8L Mods
#2
#4
Re: 3.8L Mods
Check out this website. There are many mods.... I have some headers and you can buy them from summitracing!
http://mods.firebirdv6.com/
http://mods.firebirdv6.com/
#5
Re: 3.8L Mods
The individual eleven huh? The 3.8 has stretched many different platforms from GM. Many of the GTP mods will also be applicable to your car. Likewise, the 3.4 in my car has many interchangeable parts and mods with the 3400 in the GT. A little bit of digging can net some surprising horsepower for incredibly cheap.
#6
#7
Re: will this work with my engine
whoooah!! Will that work on our RWD cars?? It doesn;t say Camaro on that page.
What do you have to do to get that on a Camaro?
#8
Re: will this work with my engine
IDK thats why i was asking like the title says, but it does say "Other GM vehicles w/ 3800 Series II Engine (must be OBD II and not drive by wire)" and i know ours are series 2 but are they OBD II and if there not can we convert them to OBD II
Last edited by evoxm9; 04-22-2011 at 07:05 PM.
#9
Re: will this work with my engine
now that ive looked at it better it wouldnt work the air in for the manifold would be on the back of the engine compartment. somebody needs to make a supercharger for our cars lay out
#11
Re: 3.8L Mods
well WTF is our 3800 series II the only one left out. it pisses me off. i found a trubo system for 96+ but im not sure if there for sale yet and requires removal of ac system
hers the link
http://www.cartuning.ca/products/pro...aro&engine=l36
hers the link
http://www.cartuning.ca/products/pro...aro&engine=l36
Last edited by evoxm9; 04-23-2011 at 03:20 PM.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
2010 - 2015 Camaro Interior, Exterior, Paint & Body, Electronics/Car Audio
0
07-07-2015 08:19 AM