Challenger owner calls out your Moderator.
Good catch Marc,
I was wondering who would be the first to notice. After the November rebuild I have not updated my signature.
My numbers are now 586 / 633
I am going to have to take it back to the dyno tuners and upgrade after the E85 swap...something else yawl didnt know.
The car before the engine build was turning 11.40s at 121 mph
I was wondering who would be the first to notice. After the November rebuild I have not updated my signature.
My numbers are now 586 / 633
I am going to have to take it back to the dyno tuners and upgrade after the E85 swap...something else yawl didnt know.

The car before the engine build was turning 11.40s at 121 mph
Thanks bro,
That LS1 is capable of awesome dyno numbers too with just a few mods.
I have had to sink around $8,500 to get mine to run like this.
Chances are that you wont have to spend near as much with that big *** displacement your carrying around
That LS1 is capable of awesome dyno numbers too with just a few mods.
I have had to sink around $8,500 to get mine to run like this.
Chances are that you wont have to spend near as much with that big *** displacement your carrying around
Good catch Marc,
I was wondering who would be the first to notice. After the November rebuild I have not updated my signature.
My numbers are now 586 / 633
I am going to have to take it back to the dyno tuners and upgrade after the E85 swap...something else yawl didnt know.
The car before the engine build was turning 11.40s at 121 mph
I was wondering who would be the first to notice. After the November rebuild I have not updated my signature.
My numbers are now 586 / 633
I am going to have to take it back to the dyno tuners and upgrade after the E85 swap...something else yawl didnt know.

The car before the engine build was turning 11.40s at 121 mph
Still the lil ole 2v setup. It does however sport a Cobra Aluminum texid block, windsor heads that fox lake completed and the compression is at 9.4:1 on a moderate 14lbs of boost. The KB 2.6 has upgraded lightning force performance intercooling and running 60lb seimens injectors. 75mm accufab throttle body, mammoth 4" cold air with 12" k&N, 90 mm KB maf meter with mafia extender,cams are custom grind so If I tell anyone I have to kill them. Cobra twin fuel pumps plus the KB BAP, mezier electric water pump...yada yada, the list goes on...lol
I think I am definitely done with this one and now going to start getting my
LT1 up and running. It runs mid 9s in the 1/4...when its healthy. Its an automatic and I keep blowing shift solenoids on it like crazy.
I think I am definitely done with this one and now going to start getting my
LT1 up and running. It runs mid 9s in the 1/4...when its healthy. Its an automatic and I keep blowing shift solenoids on it like crazy.
Still the lil ole 2v setup. It does however sport a Cobra Aluminum texid block, windsor heads that fox lake completed and the compression is at 9.4:1 on a moderate 14lbs of boost. The KB 2.6 has upgraded lightning force performance intercooling and running 60lb seimens injectors. 75mm accufab throttle body, mammoth 4" cold air with 12" k&N, 90 mm KB maf meter with mafia extender,cams are custom grind so If I tell anyone I have to kill them. Cobra twin fuel pumps plus the KB BAP, mezier electric water pump...yada yada, the list goes on...lol
I think I am definitely done with this one and now going to start getting my
LT1 up and running. It runs mid 9s in the 1/4...when its healthy. Its an automatic and I keep blowing shift solenoids on it like crazy.
I think I am definitely done with this one and now going to start getting my
LT1 up and running. It runs mid 9s in the 1/4...when its healthy. Its an automatic and I keep blowing shift solenoids on it like crazy.
...Im getting some minor things ironed out on the car right now (brake pads, window motor, squealing pulleys,etc) then im gonna bring her in for a dyno tune. I cant complain I only paid 3500 and the car only has 100k on the mutt motor and a recently rebuilt tranny...After that some springs, fresh paint and some powercoated zr1's...She'll be a head turner and possibly dipping into the 11's by spring..
funny..I ran a str8 challenger too. Guy was the same. Complete tool bag. beat me to 120, by a car, not bad. Gave him thumbs up, he laughed. No biggie, he said i should have sprayed sooner to keep up; replied, all stock ,never had a valve cover off, 175,000 miles and no spray. He rolled up the windows and flipped me off. Guess he didn't like that
Thats a badass setup for sure
...Im getting some minor things ironed out on the car right now (brake pads, window motor, squealing pulleys,etc) then im gonna bring her in for a dyno tune. I cant complain I only paid 3500 and the car only has 100k on the mutt motor and a recently rebuilt tranny...After that some springs, fresh paint and some powercoated zr1's...She'll be a head turner and possibly dipping into the 11's by spring..
...Im getting some minor things ironed out on the car right now (brake pads, window motor, squealing pulleys,etc) then im gonna bring her in for a dyno tune. I cant complain I only paid 3500 and the car only has 100k on the mutt motor and a recently rebuilt tranny...After that some springs, fresh paint and some powercoated zr1's...She'll be a head turner and possibly dipping into the 11's by spring..Cant wait to see the update on the car come summer time.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
Magenta_Hearts
New Member Introduction
4
Mar 25, 2015 10:24 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Jan 29, 2015 07:10 PM
ChrisFrez
CamaroZ28.Com Podcast
1
Dec 15, 2014 03:09 PM



