Setting up KONI double adjustables
Thread Starter
Registered User
Joined: Mar 2001
Posts: 534
From: Livingston, New Jersey
Setting up KONI double adjustables
I just put in a used set of KONI DA's on my car. BMR springs out back and 1LE up front that will soon be changed to the BMR's. Car is street driven so I would need a good general all around setting.
I have the compression set to 2/3 up front and 1/3 in the rear. Im about 1/2 way up on the rebound settings but im not sure this is right.
thanks
-TG
I have the compression set to 2/3 up front and 1/3 in the rear. Im about 1/2 way up on the rebound settings but im not sure this is right.
thanks
-TG
Thread
Thread Starter
Forum
Replies
Last Post