Is this the same basic process for LT1's?? (Spring swap)
Thread Starter
Registered User
Joined: Jan 2005
Posts: 312
From: Florida
Is this the same basic process for LT1's?? (Spring swap)
http://www.ls1howto.com/index.php?article=6
Hey guys I'm planing on putting my lowering springs in myself and I took a look at this guide. It's for ls1's but I was wondering if it's the same procedure? Anything special I should look out for? I have to get a set of spring compressors, and I have a crowbar, any other tools I should get? I have an air compressor but I don't have the money to invest in any tools for it.
Hey guys I'm planing on putting my lowering springs in myself and I took a look at this guide. It's for ls1's but I was wondering if it's the same procedure? Anything special I should look out for? I have to get a set of spring compressors, and I have a crowbar, any other tools I should get? I have an air compressor but I don't have the money to invest in any tools for it.
Registered User
Joined: Oct 2000
Posts: 2,915
From: Sacramento
Re: Is this the same basic process for LT1's?? (Spring swap)
The stock shocks are not really the hot setup for stiffer springs.
If you plan on doing it yourself, pull the shock assemblies and take them to a shop and have them use their spring compressor to swap springs.
If you plan on doing it yourself, pull the shock assemblies and take them to a shop and have them use their spring compressor to swap springs.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
