my brakes picked a fight with my welds
#1
my brakes picked a fight with my welds
I have 15x9 welds on the back of my car time to do the brakes, no problem get it all back toghether and the rear calipers rub onthe wheel. Must be the new pads spaced the caliper just enough to rub. Time to bust otu the grinder and go off on these calipers. Never can go perfect
#4
no both of the back ones were grinding, I had the same problem on the front until I ran spacers. All I did was grind the fins off of the back of the caliper. Not the whole fin but probaly 1/8". Works fine now but an unexpected problem. I hate that just changing pads and some cross drilled rotors turned into a haedache. Oh well it's done now. Time for some beer
Thread
Thread Starter
Forum
Replies
Last Post
CGM2010CAMARO
2010 - 2015 Camaro Wheels, Tires, Brakes, Suspension
0
04-07-2015 07:44 PM