Anyone have a roots styled pulley puller for a roots supercharger pulley. Just to show you it is not a standard pulley puller you need read below and go to the site and see the pic.



The OEM pulley is pressed on with tremendous force, up to a .002" press fit, resulting in more than six tons of pressure required to remove it. Through use and development, Pulleys Boys designed the three-bolt puller tool to be the toughest puller tool available. With all steel components, the best hardware available and the three-bolt design keeping the components aligned, this puller tool makes a pulley swap a routine procedure.

The Pulley Boys three-bolt puller tool includes:
(1) top plate (5/8" steel)
(1) back plate (1/2" steel)
(1) 5/8 main rod (B7 alloy)
(1) 5/8 high hex nut (Grade 8)
(2) 5/8 washers (Hardened)
(3) 3/8 bolts (Grade 5)
(3) 3/8 washers
(2) M8 studs (class 45H)
(2) M8 washer


http://www.pfyc.com/store/merchant.m...y_Code=GPUNDER

Pic Of puller