looking for the chassis wiring harness from a OBD 1 car 94 preferably, and a M6. This is the harness that has the under hood fuse block, and connects to the headlights ect.. It plugs in behind the brake boost cylinder.

Thanks
Patrick
Patrick@fastbluetoys.com

 

hey i got one, its from a 95 camaro the only problem with it is that a factory gm alarm was removed from the harness so there's several wires that need to be spliced back together under the dash side of the harness... email me
freeland24@
comcast.net

^sorry for that stoping spam searchers

josh

 

wires that need to be spliced under the dash? Cant you unplug it from the drivers side of the firewall?

THanks

Patrick

 

yes and no all in the same breath, what i could unplug i did,
however certain cables, like the ignition cable gets cut ran thought the alarm and then returned... depending on how urgent it is for you, i can actually get all the splicing done and check all the wires for continuity.

i have three camaro's one did a bit of a jump off of a cliff, but most of it survived i've been carfully removing parts. I need most of the parts but that harness i don't need. If you want i'll splice the cable's together considering i have 2 camaros that are in peices i can copy the other camaros harness

don't know thought...
its your call as far as i'm concerned cause i don't really care about the harness right now, i will be putting all the remaining parts in working condition up for sale shortly. If you waited until then, i can promise the wiring harness will be fully repaired.

josh

 

Patrick,
I have the harness that you need. It came out of a '95z, with 64k mi. Email me if you are still looking. The harness is in good working shape. Nothing cut, all the clips are there.

Dan
a72oldss@yahoo.com