I have the summit universal x-pipe setup on my car right now, but I would like to get rid of it. I am going in a different direction with the exhaust, i.e. open headers.

The system is professionally welded together with dynomax bullet mufflers and 45 degree turndowns pointing to the outside. The mufflers are a little dinged and scratched from bottoming out when they were on my previous true dual setup, which was not done very well. The lowest point in this system in the tips of the turndowns, they are scratched also but not badly. It may need new flanges to connect to the headers because i unbolted the system and swung it down so it was held on by one bolt at the top(easy open headers). I bottomed out a few times and the flanges got pretty messed up.

It also has hangers that keep it tucked up as high as possible. I will include these with the system.

The setup looks exactly like this one pictured here(but with turndowns):

http://community.webshots.com/photo/...38234840IncMRk

i would like to get 225 for the whole thing plus shipping if possible.

I have about 350 invested in the system including labor to weld everything together and put the hangers where they needed to be. so 225 for everything is a steal.

E-mail, PM, or post here with any questions or if you are interested.

 

I am looking for 3" pipes which connect from the muffler to the cat. Do you have this? If so I am interested in purchasing it from you. I have a 2001 V6 Camaro and I have a magnaflow muffler and just want to replace my stock 2.5" pipes to 3". Please reply back to me here or email me at scof0elife@yahoo.com if you have this up for sale?