Was setting car up for drags, changed mind and now going to road race/autoX my 95 Z28. The following suspension items are brand new in the box, manufactures part numbers are listed so you can check application.Click on these links for BMR F body pages http://www.bmrfabrication.com/F-bodySuspension.htm or http://www.bmrfabrication.com/F-bodyChassis.htm

$150pr BMR SFC001 BOXED SUB FRAME CONECTORs RED

$300pr QA1 OED7855P SNGL ADJ FRNT SHOCKS = SOLD

$275pr QA1 TC2502P SNGL ADJ REAR SHOCKS = SOLD


$85 pr QA1 15SF300 FRNT COIL OVER SPRINGS = SOLD


$35 set QA1 SPANNER WRENCH/THRUST BEARING KIT = SOLD

Will sell complete QA1 spring/shock setup w/ spanner wrench/bearing kit for $550 =SOLD


All parts are located in Tampa Fl. 33611,
Shipping is extra. PM me for shipping costs

 

Bump TTT

 

Bump TTT

 

What shocks are you going to use up front then for autocross? Are those the R-series shocks or F-series ?

 

How come you're not using the Sub Frame connectors for road racing? I'd keep those to maintain balance on the car, as long as you already have springs/shocks/sway bars.

 

the sub frame connectors actually make the car too stiff, not allowing the car to flex in and out of the corner,w/ SFC the posibility of one of the rear tires coming off the ground in heavy back and forth cornering is there.

the car is set up w/ 600lb frnt sprngs, w/ koni DA shocks, grnd effects spring ht adjtrs., Strano hollow 35mm swaybar,,,
rear: Strano hollow 19mm bar, hotchkins DA panhard, koni SA shocks and 150lb sprngs w/ grnd effects hgt adjtrs.

works great,,,

 

Bump TTT

 

QA1's SOLD to me! Everything was shipped promptly and packaged perfectly. Couldn't ask for a better transaction. Thanks again and here's a TTT for the SFC's.