Misc Parts for Sale
Misc Parts for Sale
Ok, guys and gals I have a few parts left over from the stroker LT-1 build that have been sitting at my house and need to get moved. Here's a list let me know if you have any questions.
Pics of everything is here:
http://s239.photobucket.com/albums/ff292/wdaveweaver/
1) Accel 870 hp electric fuel pump w/fittings (Accel Part #74702) w/accel mounting bracket (accel part # 74710) and an LT-1 Accel fuel filter everything - $360 plus shipping and paypal fee (3%)
The pump and filter are brand new and have never been installed or used and the bracket never even opened.
2) Zoops (aluminum goodies)
Zoops Aluminum Centerbolt valve covers (part #1600) - $100 (plus shipping and paypal fees 3%) - SOLD
one of these valve covers was installed for about a month and then removed once my stock covers were cromed. Please keep in mind these will not work on the LT-1 without mods as there is clearance issues with the alt bracket. Also, I am missing one set of screws but these can be obtained thru zoops or easily at your local harware store. The other cover has a couple of scratches as it just sat on the motor during assembly and they will need to be polished, but that's easy.
Zoops Billet Oval Breather (part #3100) and PCV Oval Breather (part #3150) - $30 a piece (plus shipping and paypal) - The breather (nonpcv) is still sealed in the pkg.
Zoops Billet A/C Clutch cover plate (part #6201) - $40 (plus shipping and paypal)
(Still sealed in the PKG)
3) Ford 30lb/hr (red top) injectors - These were used for one dyno run and then we decided to go with different ones. - $275 (set of 8) (Part #M-9593-B302) - plus shipping and paypal. - SOLD
4) HyperTech III programmer plus for 98-99 Chevy/GMC Silverado,Suburban, Denali, Escalade, etc.. (part #390202) - $200 (plus shipping and paypal)
5) Billet MAF housing for LT-1 (not sure on brand as I can't remember) will need to be polished - $50 (plus shipping and paypal) - SOLD
6) MSD LT-1 Wire harness - $10 (plus shipping and paypal) - SOLD
7) Hypertech Powerstat (160 thermostat for LT-1) - $5 (plus shipping and paypal) - SOLD
8) Napa Insul Boot Plug wire protectors (set of 2) (part #727508 neutral color) - $10 (plus shipping and paypal)
9) RCI Transmission Scatter Blanket/Shield (Part #7808A racing app) - never installed and brand new just a few grease marks - $75 (plus shipping and paypal)
10) Misc breather and Mr Gasket PCV breather with gromets (Mr Gasket is new and in pkg and the other is never installed) - $10 for both (plus shipping and paypal)
All prices are OBO, so feel free to PM me or post a message and let me know. If the pics are not clear then just let me know and I can send you another one if you need. Thanks.
Pics of everything is here:
http://s239.photobucket.com/albums/ff292/wdaveweaver/
1) Accel 870 hp electric fuel pump w/fittings (Accel Part #74702) w/accel mounting bracket (accel part # 74710) and an LT-1 Accel fuel filter everything - $360 plus shipping and paypal fee (3%)
The pump and filter are brand new and have never been installed or used and the bracket never even opened.
2) Zoops (aluminum goodies)
Zoops Aluminum Centerbolt valve covers (part #1600) - $100 (plus shipping and paypal fees 3%) - SOLD
one of these valve covers was installed for about a month and then removed once my stock covers were cromed. Please keep in mind these will not work on the LT-1 without mods as there is clearance issues with the alt bracket. Also, I am missing one set of screws but these can be obtained thru zoops or easily at your local harware store. The other cover has a couple of scratches as it just sat on the motor during assembly and they will need to be polished, but that's easy.
Zoops Billet Oval Breather (part #3100) and PCV Oval Breather (part #3150) - $30 a piece (plus shipping and paypal) - The breather (nonpcv) is still sealed in the pkg.
Zoops Billet A/C Clutch cover plate (part #6201) - $40 (plus shipping and paypal)
(Still sealed in the PKG)
3) Ford 30lb/hr (red top) injectors - These were used for one dyno run and then we decided to go with different ones. - $275 (set of 8) (Part #M-9593-B302) - plus shipping and paypal. - SOLD
4) HyperTech III programmer plus for 98-99 Chevy/GMC Silverado,Suburban, Denali, Escalade, etc.. (part #390202) - $200 (plus shipping and paypal)
5) Billet MAF housing for LT-1 (not sure on brand as I can't remember) will need to be polished - $50 (plus shipping and paypal) - SOLD
6) MSD LT-1 Wire harness - $10 (plus shipping and paypal) - SOLD
7) Hypertech Powerstat (160 thermostat for LT-1) - $5 (plus shipping and paypal) - SOLD
8) Napa Insul Boot Plug wire protectors (set of 2) (part #727508 neutral color) - $10 (plus shipping and paypal)
9) RCI Transmission Scatter Blanket/Shield (Part #7808A racing app) - never installed and brand new just a few grease marks - $75 (plus shipping and paypal)
10) Misc breather and Mr Gasket PCV breather with gromets (Mr Gasket is new and in pkg and the other is never installed) - $10 for both (plus shipping and paypal)
All prices are OBO, so feel free to PM me or post a message and let me know. If the pics are not clear then just let me know and I can send you another one if you need. Thanks.
Last edited by DAVE00; Sep 21, 2007 at 08:21 AM. Reason: corrected item description for injectors
i will take the 160 T-Stat could you send me some pics to Executioner2k5@yahoo.com and give me a total for it please
http://www.fordracingparts.com/parts...tKeyField=1181
Let me know what you wanna do?
i will take the 160 T-Stat could you send me some pics to Executioner2k5@yahoo.com and give me a total for it please
Last edited by DAVE00; Sep 13, 2007 at 08:04 PM.
Waite1of4,
Sent you a PM about a correction on the injectors.
FYI - For the rest of you, the injectors are actually 30#/hr as I did some more research and remembered I replaced them with the 24# and put them back in the 24# box. These injectors have only been used for one dyno run and have less than one hour use. Here are some numbers from the injectorsfor your reference:
Part #M-9593-B302 (30#/hr)
numbers on the injector (280150945) (F1SE-E5A)
Sent you a PM about a correction on the injectors.
FYI - For the rest of you, the injectors are actually 30#/hr as I did some more research and remembered I replaced them with the 24# and put them back in the 24# box. These injectors have only been used for one dyno run and have less than one hour use. Here are some numbers from the injectorsfor your reference:
Part #M-9593-B302 (30#/hr)
numbers on the injector (280150945) (F1SE-E5A)


