NX wet kit, gen2 kit, remote opener, digital window switch, etc...
#1
NX wet kit, gen2 kit, remote opener, digital window switch, etc...
Ok, so up for sale is my nx wet kit, It has been installed on two vehicles, a mustang and a camaro. I have since sold both cars, but I took my nitrous kit out before selling them and have no use for it anymore.
I have a recipt from RPM outlet with a total of $1260.25 not including my Autometer nitrous pressure guage, and extra bottle heater element.
I am asking $800+ shipping for everything.
Sorry for the lack of pics. I will take detailed pictures of everything included with the kit tommorow afternoon when I get out of work.
Included:
NX ford wet kit w/10lb bottle (the only difference is a extra fitting the ford kit includes to adapt the fuel feed line to the shrader valve. this is not needed on a gm application.)
gen2 upgrade kit
NX bottle opener
NX bottle heater x2
MSD digital window switch
You may need to get your hands on afew switches, and solinoid brackets depending on how you install it. the only thing wrong with this kit is the fitting from the bottle to the nitrous feed line has a nick from bieng in storage and will need to be replaced, could be bought from NX, not sure how much but it shouldnt be expencive. also the nuts from on top of the solinoids were lost and replaced with hardware store nuts. 100% functional but not as pretty as the originals
Altogether this is a nice reliable setup with all the safety equipment. please email me nonojoe66@aol.com, or give me a call at 845 641 4937 if you are interested. thanks
I have a recipt from RPM outlet with a total of $1260.25 not including my Autometer nitrous pressure guage, and extra bottle heater element.
I am asking $800+ shipping for everything.
Sorry for the lack of pics. I will take detailed pictures of everything included with the kit tommorow afternoon when I get out of work.
Included:
NX ford wet kit w/10lb bottle (the only difference is a extra fitting the ford kit includes to adapt the fuel feed line to the shrader valve. this is not needed on a gm application.)
gen2 upgrade kit
NX bottle opener
NX bottle heater x2
MSD digital window switch
You may need to get your hands on afew switches, and solinoid brackets depending on how you install it. the only thing wrong with this kit is the fitting from the bottle to the nitrous feed line has a nick from bieng in storage and will need to be replaced, could be bought from NX, not sure how much but it shouldnt be expencive. also the nuts from on top of the solinoids were lost and replaced with hardware store nuts. 100% functional but not as pretty as the originals
Altogether this is a nice reliable setup with all the safety equipment. please email me nonojoe66@aol.com, or give me a call at 845 641 4937 if you are interested. thanks
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
01-23-2015 01:13 PM
Speeds8erM-1
Drag Racing Technique
1
07-28-2002 06:18 PM
Speeds8erM-1
Drag Racing Technique
6
07-18-2002 11:36 PM