LT1Boost PT88 Turbo kit + Intercooler
#1
LT1Boost PT88 Turbo kit + Intercooler
Custom T88 Header Kit (capable of 1000hp) - $1500 shipped - PRICE DROP
Mild Steel Hotparts Setup for a PT88 T4 turbo (turbo not included)
Intercooler + intercooler piping ready to bolt up to car.
Custom made 1 5/8" headers with 2.5" Vband flanges
2.5" crossover/merge pipe
3" Downpipe that runs to the bellhousing
4" Downpipe (race dump pipe) that exits down to the ground in front of the k-member
includes 44mm Wastegate with 20psi spring (you will have to buy lower springs to run lower boost)
Thermo Tec graphite black exhaust wrap already installed ($200 worth of wrap)
Comes with an instruction manual for installation
Requirements for installation:
1. You will have to stand the radiator up vertical.
2. You will need slimmer electric fans
3. You will need to rotate the oil cooler tube up on the water pump... so you will most likely need to delete your oil cooler if you have one on your car.
4. You will have to delete your A/C, smog pump (A.I.R. injection pump) and block off the EGR ports on the back of the intake.
5. You may need to grind/modify a portion of the ABS block in order to clear the driver's side header.
Please PM with an offer.
Pictures:
How To Install Intercooler + Pics
https://www.camaroz28.com/forums/sho...light=lt1boost
Mild Steel Hotparts Setup for a PT88 T4 turbo (turbo not included)
Intercooler + intercooler piping ready to bolt up to car.
Custom made 1 5/8" headers with 2.5" Vband flanges
2.5" crossover/merge pipe
3" Downpipe that runs to the bellhousing
4" Downpipe (race dump pipe) that exits down to the ground in front of the k-member
includes 44mm Wastegate with 20psi spring (you will have to buy lower springs to run lower boost)
Thermo Tec graphite black exhaust wrap already installed ($200 worth of wrap)
Comes with an instruction manual for installation
Requirements for installation:
1. You will have to stand the radiator up vertical.
2. You will need slimmer electric fans
3. You will need to rotate the oil cooler tube up on the water pump... so you will most likely need to delete your oil cooler if you have one on your car.
4. You will have to delete your A/C, smog pump (A.I.R. injection pump) and block off the EGR ports on the back of the intake.
5. You may need to grind/modify a portion of the ABS block in order to clear the driver's side header.
Please PM with an offer.
Pictures:
How To Install Intercooler + Pics
https://www.camaroz28.com/forums/sho...light=lt1boost
Last edited by Fuzion1; 11-29-2009 at 03:55 PM.
#10
wow I cannot beleive you havnt sold this at this price!
Guys this is a great price for this!
Sorry i have a third gen LTx swap(steering gets in the way for this) or else I prob woulda bought this instead of making my kit lol
Jay
Guys this is a great price for this!
Sorry i have a third gen LTx swap(steering gets in the way for this) or else I prob woulda bought this instead of making my kit lol
Jay
Thread
Thread Starter
Forum
Replies
Last Post
LT1runner
Automotive News / Industry / Future Vehicle Discussion
33
07-24-2002 01:19 PM