LT1 Blower Cam 224/236 FS
Thread Starter
Moderator
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
LT1 Blower Cam 224/236 FS
The cam is a Comp Cams high lift XE grind with specs below. It was used for just 1,000 miles and is in perfect condition.
224/236 @ 0.050" lift
116 lobe separation angle
112 degree intake center line (4 deg of advance ground in)
lobe lift = .378/.390"
lift with 1.5 = .567/.585"
lift with 1.6 = .605/.624"
Price is $150.
Rich Krause
224/236 @ 0.050" lift
116 lobe separation angle
112 degree intake center line (4 deg of advance ground in)
lobe lift = .378/.390"
lift with 1.5 = .567/.585"
lift with 1.6 = .605/.624"
Price is $150.
Rich Krause
Registered User
Joined: Jun 2002
Posts: 214
From: DFW
Re: LT1 Blower Cam 224/236 FS
Is the cam still for sale. Rich, what springs do you reccomend with 1.6 rr's that would fit in the stock seats and wouldn't need to be replaced often.
Never mind I just noticed the post date.
Justin
Never mind I just noticed the post date.
Justin
Last edited by 96vortechSS; Aug 17, 2005 at 08:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
1LEThumper
Forced Induction
40
Jul 14, 2003 12:45 PM