heads,cam and rods FS
#1
heads,cam and rods FS
ok i have a set of le3 heads. they have rev valves 1.57 int and 2.05 exh with new a larger seats. they have a set of the cmotorsports 918 springs. they are equal to the comp 987s. i will tell you that cmotorsports have some trouble with the 612s but i dont recall any trouble with the 918s. but i have a set of k motion 800s (k-800) to go on them for the cam.
now the cam is a joe overton cam is a 240 248 with a 108 lsa and a 570 lift. this cam is alot more aggressive than the old le3 that he made. it will need alot of tuning. he said with these heads it should make 450 rwhp though a 6 speed.
now back to the k-800 springs. to give you an idea of the cam design the springs have to be set up at a 1.820, becuase the ramps on the cam need 180#s on the seat and about at least 450 open.
now to the person who buys them. the retainers and locators and locks that are on the 918s now, will work with the k-800s. and the only reason i havent put them on is because i dont have anyone around here that i trust to do it right.
flow numbers are below
avg: cfm intake 200
avg exhaust 145.5
lift int exh
.0500 36.5 27.0
.1000 67.4 50.6
.1500 104 78.7
.2000 138.6 166.2 ??? this must be a type O
.2500 167.4 128.0
.3000 194.4 144.5
.3500 224.3 156.5
.4000 245.0 167.3
.4500 259.7 174.1
.5000 268.6 180.7
.5500 273.7 186.3
.6000 276.4 190.2
.6500 277.4 192.5
.7000 274.2 194.4
i would like to get 1200 for the heads and cam and the k-800 springs.
i have alot more than that in them.
RODS
i have a set of lunati rods with arp bolts the rods have 800 miles on them. i would like 325.
call me at 254 747 2633 cell or pm me.
paypal or money order please.
now the cam is a joe overton cam is a 240 248 with a 108 lsa and a 570 lift. this cam is alot more aggressive than the old le3 that he made. it will need alot of tuning. he said with these heads it should make 450 rwhp though a 6 speed.
now back to the k-800 springs. to give you an idea of the cam design the springs have to be set up at a 1.820, becuase the ramps on the cam need 180#s on the seat and about at least 450 open.
now to the person who buys them. the retainers and locators and locks that are on the 918s now, will work with the k-800s. and the only reason i havent put them on is because i dont have anyone around here that i trust to do it right.
flow numbers are below
avg: cfm intake 200
avg exhaust 145.5
lift int exh
.0500 36.5 27.0
.1000 67.4 50.6
.1500 104 78.7
.2000 138.6 166.2 ??? this must be a type O
.2500 167.4 128.0
.3000 194.4 144.5
.3500 224.3 156.5
.4000 245.0 167.3
.4500 259.7 174.1
.5000 268.6 180.7
.5500 273.7 186.3
.6000 276.4 190.2
.6500 277.4 192.5
.7000 274.2 194.4
i would like to get 1200 for the heads and cam and the k-800 springs.
i have alot more than that in them.
RODS
i have a set of lunati rods with arp bolts the rods have 800 miles on them. i would like 325.
call me at 254 747 2633 cell or pm me.
paypal or money order please.
#3
Re: heads,cam and rods FS
$1100 plus shipping. that will save you about 400 bucks, (if i remember right).
and i will post pics on my site. tommorow.
and i will post pics on my site. tommorow.
Last edited by 97Z-M6; 11-21-2005 at 07:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
armedtrigger
LT1 Based Engine Tech
10
02-24-2015 08:30 PM
F(ast)-body
LT1 Based Engine Tech
8
02-26-2003 09:05 AM