FS: TFS Twisted Wedge heads
Thread Starter
Registered User
Joined: Aug 2001
Posts: 222
FS: TFS Twisted Wedge heads
Older style TrickFlow Twisted wedge cylinder heads. Heads were ported by a local PROMOD engine builder. They started as 64 chamber, I cc'ed them around 67cc now. The heads have major intake, exhaust and bowl work. They have approx 3,500 miles on them. They are just too small for my cubic inches. Heads will be sold complete with valves and springs for .540 lift. These heads are hot tanked with new valve seals, and look brand new. These use centerbolt valve covers, which are available, and they are for pre 87 intake manifolds.
MAKE RESONABLE OFFER
MAKE RESONABLE OFFER
Thread Starter
Registered User
Joined: Aug 2001
Posts: 222
I would consider in the neighborhood of 800 resonable for heads that cost 1,200 with 600 worth of porting into them.
I also have Crane Gold race roller rockers for sale with 3500-4000 miles, and also center bolt valve covers to fit
I also have Crane Gold race roller rockers for sale with 3500-4000 miles, and also center bolt valve covers to fit
Registered User
Joined: Jan 2002
Posts: 348
From: Jonesboro, GA, USA
How good would these heads be for making a good torquey setup and peak power before 6000rpm? What ratio are the rockers? I would be willing to make you an offer on the centerbolt valve covers, the heads, and possibly the rockers.. but I really wasn't looking to spend this much on heads, as my setup is rather mild. However, if you'd be willing to take a deposit to hold them, I could come up with the extra cash in a paycheck or two. So if you haven't had any offers, and would like to do that, let me know! Thanks
Registered User
Joined: Apr 1999
Posts: 205
Re: FS: TFS Twisted Wedge heads
Originally Posted by jnjspdshop
Older style TrickFlow Twisted wedge cylinder heads. Heads were ported by a local PROMOD engine builder. They started as 64 chamber, I cc'ed them around 67cc now. The heads have major intake, exhaust and bowl work. They have approx 3,500 miles on them. They are just too small for my cubic inches. Heads will be sold complete with valves and springs for .540 lift. These heads are hot tanked with new valve seals, and look brand new. These use centerbolt valve covers, which are available, and they are for pre 87 intake manifolds.
MAKE RESONABLE OFFER
MAKE RESONABLE OFFER
Registered User
Joined: Nov 2003
Posts: 126
Thread Starter
Registered User
Joined: Aug 2001
Posts: 222
Re: FS: TFS Twisted Wedge heads
Heads have been sold for some time now, I still do have a few sets of Crane Gold race RR arms, all 3/8" studs, I have 1.5's, and 2 sets of 1.6's one self align and one standard, pretty much all will work with LT1 engines
Thread
Thread Starter
Forum
Replies
Last Post
Victor Lamb
Suspension, Chassis, and Brakes
3
Aug 26, 2017 02:52 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Dec 28, 2014 06:20 PM