FS: Fully-forged LT1 383 shortblock...
#1
FS: Fully-forged LT1 383 shortblock...
I have a pretty nasty 383 LT1 motor for sale...
383 solid roller LT1 motor = This motor should make around 475rwhp. has a custom solid roller Cam Motions camshaft, Cloyes double-roller timing chain, B&M flexplate, ATI Super dampner, Callies 3.75 Dragonslayer fully forged crankshaft, Lunati 5.85 Pro Mod Rods, JE flat top forged nitrous pistons, Clevite H series main and rod bearings, Callies 4-bolt billet splayed main caps, ARP main studs and ARP rod bolts, Brand new freeze plugs and cam bearings. The block was hot tanked, bored and honed with plate, decked block, line bore, line hone, clearance for the stroker, rotating assembly is internally balanced, pistons and rods were honed, and everything is assembled. I have 1220.00 in machine work, a 800.00 crank, 630.00 rods, 500.00 pistons, 80.00 main studs, 19.00 cam bearings, 11.00 freeze plugs, 65.00 flexplate, 80.00 timing set, 400.00 super dampner, 110 main bearings, 110 rod bearings, 200 main caps, 400.00 custom ground cam.
So that is 4625 dollars in this shortblock. No expense was spared. I will let it go for 4000.00 Since I know that is a lot of money for most people, I am prepared to setup a payment plan if need be. I know tax refunds will be coming in a couple months.
This is a great street/strip motor that is going to go very fast in the right car. I have all receipts on this motor from parts to machine work. The motor has never been fired, but it is fully assembled.
I have pics available if you are interested.
Let me know and please email as my PMs fill up too fast
balboalt1@yahoo.com
383 solid roller LT1 motor = This motor should make around 475rwhp. has a custom solid roller Cam Motions camshaft, Cloyes double-roller timing chain, B&M flexplate, ATI Super dampner, Callies 3.75 Dragonslayer fully forged crankshaft, Lunati 5.85 Pro Mod Rods, JE flat top forged nitrous pistons, Clevite H series main and rod bearings, Callies 4-bolt billet splayed main caps, ARP main studs and ARP rod bolts, Brand new freeze plugs and cam bearings. The block was hot tanked, bored and honed with plate, decked block, line bore, line hone, clearance for the stroker, rotating assembly is internally balanced, pistons and rods were honed, and everything is assembled. I have 1220.00 in machine work, a 800.00 crank, 630.00 rods, 500.00 pistons, 80.00 main studs, 19.00 cam bearings, 11.00 freeze plugs, 65.00 flexplate, 80.00 timing set, 400.00 super dampner, 110 main bearings, 110 rod bearings, 200 main caps, 400.00 custom ground cam.
So that is 4625 dollars in this shortblock. No expense was spared. I will let it go for 4000.00 Since I know that is a lot of money for most people, I am prepared to setup a payment plan if need be. I know tax refunds will be coming in a couple months.
This is a great street/strip motor that is going to go very fast in the right car. I have all receipts on this motor from parts to machine work. The motor has never been fired, but it is fully assembled.
I have pics available if you are interested.
Let me know and please email as my PMs fill up too fast
balboalt1@yahoo.com
#2
Re: FS: Fully-forged LT1 383 shortblock...
Guys this is somewhat OBO. I am not going to come down like 1000.00 but I am negotiable as it is just sitting on an engine stand in the garage.
#5
Re: FS: Fully-forged LT1 383 shortblock...
hey man thats a awsome engine there, i will take it in march for 3500 dollars if you still got it around, i have to finish hockey season first hahaha, good luck selling it, keep me in mind my email is hens91@hotmail.com my name is scott.
#6
Re: FS: Fully-forged LT1 383 shortblock...
Originally Posted by jerminator96
Mainly out of curiousity....what heads are you basing that 475rwhp off of?
#8
Re: FS: Fully-forged LT1 383 shortblock...
Originally Posted by racer96
hey man thats a awsome engine there, i will take it in march for 3500 dollars if you still got it around, i have to finish hockey season first hahaha, good luck selling it, keep me in mind my email is hens91@hotmail.com my name is scott.
#9
Re: FS: Fully-forged LT1 383 shortblock...
Do you still have the heads that you mentioned for sale? I'm building a 383 myself, and am looking for a good set of heads for it. If so, or if you have a lead on a good set email me at My31bird@aol.com
Thanks
Brandon
Thanks
Brandon
#10
Re: FS: Fully-forged LT1 383 shortblock...
Originally Posted by trymy6
Do you still have the heads that you mentioned for sale? I'm building a 383 myself, and am looking for a good set of heads for it. If so, or if you have a lead on a good set email me at My31bird@aol.com
Thanks
Brandon
Thanks
Brandon
#11
Re: FS: Fully-forged LT1 383 shortblock...
Originally Posted by texasTA
I had some fully ported LT4 castings from Jordon Musser that were flowing 313in. at like .650 and 220ex. at .650 Those heads had crazy numbers through the mid-flow also.
#15
Re: FS: Fully-forged LT1 383 shortblock...
Originally Posted by 96badbird
TTT for ya hate to hear your sellin that bad dude.... ive got a black 97 im partin out if ya need anyting.
ld
ld