FS: Cam, Dual springs, Ti retainers, Flexplate
Thread Starter
Registered User
Joined: Nov 2004
Posts: 599
From: Waterloo, Ontario
FS: Cam, Dual springs, Ti retainers, Flexplate
B&M Flexplate Part #20238 New in box. Fits 86-94 SBC, 92-97 LT1 with one piece rear main seal, external balance, 153 tooth SOLD Summit is $95
Comp Cams ground custom cam. Came out of a 383 LT1 that I bought. Specs are 240/244 @.050 .540/.544 lift 114 ICL 114 LSA Hydraulic roller. I can email the cam card if needed. SOLD
Comp Cams 977 Dual springs, 730 Titanium 10 deg. retainers, spring seats and some shims included. Were used with the cam above for 4000 miles. Fits SBC, TPI, LT1 (heads may need spring pockets machined) Summit is $143 Springs $306 Retainers
Comp Cams ground custom cam. Came out of a 383 LT1 that I bought. Specs are 240/244 @.050 .540/.544 lift 114 ICL 114 LSA Hydraulic roller. I can email the cam card if needed. SOLD
Comp Cams 977 Dual springs, 730 Titanium 10 deg. retainers, spring seats and some shims included. Were used with the cam above for 4000 miles. Fits SBC, TPI, LT1 (heads may need spring pockets machined) Summit is $143 Springs $306 Retainers
Last edited by 96flame; Nov 26, 2008 at 06:34 PM. Reason: updating
Thread
Thread Starter
Forum
Replies
Last Post