cc502 cam, LT1 pushrods, powerdyne throttle body elbow, holley air foil, LT1 ram air
02-15-2012, 10:54 AM
#1
Registered User
Thread Starter
Join Date: May 2008
Posts: 146
Powerdyne throttle body elbow, LT1 MAF, M6 shift boots, 24 lb injectors OEM
I have a few extra parts sitting around I need to get rid of.
Powerdyne throttle body elbow - Looks just like the vortech elbow seen here, except there is a P cast into the top of it
: Vortech 4GH112-050 Vortech L98/TPI/LT1/ Intake Elbow Kits
$45 shipped does not come with rubber
24 lb/hr OEM Injectors - removed from my 94 Formula with about 70,000 miles, worked great, I upgraded to 42s. $70 shipped
94 LT1 MAF working good when removed, Firebird had about 68,000 miles, sensor only no housing $45 shipped
93-97 Firebird M6 Shift boot leather/vinyl charcoal in color great shape no rips or tears $30 shipped
93-97 Camaro M6 shift boot leather/vinyl Black in color great shape no rips or tears $25 shipped
93-02 Firebird rear turn signals pair $10 shipped
CC502 cam - (218/224 .528/.537 112lsa) w/ 1.6RR's
brand new in box, it has been sitting on the shelf for a while and has developed a tiny bit of surface rust. There is no pitting on any of the lobes, I wiped it down with oil and alot of the rust came right off. Should clean up fine. SOLD
Comp cams LT1 pushrods - 7.2 length 5/16 width set of 16, great shape
these sell new for about $100
SOLD
LT1 ram air bellow - This is the rubber piece that connects the throttle body to the maf for a LT1 ram air box, hard to find
SOLD
Holley air foil - great shape, works much better than the small metal ones, this air foil actually sticks out past the throttle body. They sell for $64 new, more info at: Holley 120-140 - Holley TPI Airfoils - Overview - SummitRacing.com
SOLD
If you need pictures of anything let me know.
Powerdyne throttle body elbow - Looks just like the vortech elbow seen here, except there is a P cast into the top of it
: Vortech 4GH112-050 Vortech L98/TPI/LT1/ Intake Elbow Kits
$45 shipped does not come with rubber
24 lb/hr OEM Injectors - removed from my 94 Formula with about 70,000 miles, worked great, I upgraded to 42s. $70 shipped
94 LT1 MAF working good when removed, Firebird had about 68,000 miles, sensor only no housing $45 shipped
93-97 Firebird M6 Shift boot leather/vinyl charcoal in color great shape no rips or tears $30 shipped
93-97 Camaro M6 shift boot leather/vinyl Black in color great shape no rips or tears $25 shipped
93-02 Firebird rear turn signals pair $10 shipped
CC502 cam - (218/224 .528/.537 112lsa) w/ 1.6RR's
brand new in box, it has been sitting on the shelf for a while and has developed a tiny bit of surface rust. There is no pitting on any of the lobes, I wiped it down with oil and alot of the rust came right off. Should clean up fine. SOLD
Comp cams LT1 pushrods - 7.2 length 5/16 width set of 16, great shape
these sell new for about $100
SOLD
LT1 ram air bellow - This is the rubber piece that connects the throttle body to the maf for a LT1 ram air box, hard to find
SOLD
Holley air foil - great shape, works much better than the small metal ones, this air foil actually sticks out past the throttle body. They sell for $64 new, more info at: Holley 120-140 - Holley TPI Airfoils - Overview - SummitRacing.com
SOLD
If you need pictures of anything let me know.
Last edited by cyteone; 03-03-2012 at 02:42 PM.
02-15-2012, 10:39 PM
#2
Registered User
Join Date: Feb 2012
Location: Minnesota
Posts: 235
Re: cc502 cam, LT1 pushrods, powerdyne throttle body elbow, holley air foil, LT1 ram
Those pushrods are the right length for that cam right? if so id like to work out a combo deal, pm me your price shipped
will you do 180$ shipped, I have money in my bank account, can send paypal asap.... been shopping for a cam for awhile....
will you do 180$ shipped, I have money in my bank account, can send paypal asap.... been shopping for a cam for awhile....
Last edited by greenformula94; 02-15-2012 at 10:42 PM.
02-16-2012, 12:24 PM
#3
Registered User
Thread Starter
Join Date: May 2008
Posts: 146
Re: cc502 cam, LT1 pushrods, powerdyne throttle body elbow, holley air foil, LT1 ram
The pushrods I have will work with the cam. I got a bunch of questions about the cam and pushrods, the lowest I would go for the pair is $200 shipped.
Here are some pics:
Throttle body elbow:
Holley Airfoil:
Here are some pics:
Throttle body elbow:
Holley Airfoil:
Last edited by cyteone; 02-17-2012 at 01:02 PM.
02-24-2012, 12:47 AM
#9
Registered User
Join Date: Feb 2012
Location: Fort Worth TX
Posts: 181
Re: cc502 cam, LT1 pushrods, powerdyne throttle body elbow, holley air foil, LT1 ram
I want the Airfoil... but I dont have paypal lol. Ill ask my dad tomorrow. Can you PM what I need to get the money on paypal, I guess your paypal info.
Thread
Thread Starter
Forum
Replies
Last Post
Rich_z28
Car Audio and Electronics
3
08-29-2002 10:44 PM