I am going to switch to a SR setup and am selling my HR parts. A description of each is below with individual prices. I prefer to sell everything together and offer $60 off the individual total to the first person who takes everything. If you want only some of the parts, it's first come/first served but I will wait a couple of days before accepting partial offers to try to find a buyer for all of the parts.

Comp Cams custom"blower" HR cam: CC XE lobes #3192/3196, 224/236 @ 0.050", 0.567/.585" lift with 1.5 rockers, 116LSA, 112ICL. Used one year, 1,200 miles with new lifters, PERFECT condition. Retail $250, FS for $175.

Comp Cams Pro Magnum ("R") Hydraulic Roller lifters: Used one year, 1,200 miles with the above cam. PERFECT condition. Retail $260, FS $175.

Manley 4130 Pushrods: 5/16" diameter, 0.080" wall thickness, 7.200" (stock length). Used three years, 11,000 miles. Retail $120, FS $60.

Comp Cams #977 springs: 1.460" OD 155# at 1.850", rate = 441lb/in, 419# @ 1.250", coil bind = 1.195". Max lift ~0.625". Set of titanium retainers and 10 degree Super Locks for #977 springs. Used one year, 1,200 miles, PERFECT condition. Retail $275, FS $175.

Crane aluminum "race" roller rockers, 1.5:1 ratio. Narrow body, non-self aligning. Anodized blue and stamped with "Carroll Supecharging" logo. Used five years, 20,000 miles. Retail $300, FS $125.

Total retail for these items is ~$1,205. Total of individual prices is $710. Will sell everything (whole lot) for $650. Or, you can be the first to claim an individual item and you can have it if the whole lot doesn't sell in a few days. I deal fairly whenever I sell/buy parts. Ask anyone who has dealt with me (Chris Bennight and Jason Short among others). All of these are fully functional parts in perfect or excellent condition. I am only selling because I have decided to dabble in a SR setup.

Rich Krause

addendum: I will split ground shipping with anyone who buys the whole package.

 

Glad to see you are joining the solid roller club Rich

You will have no problems in dealing with Rich.....GREAT guy!
Jason

 

Thanks! Your car kind of inspired me to do this. Just decided tonight.

Regards.

Rich

 

sent you a pm on the cam

 

Not that Rich should really need a reference-
Anyone who's spent any time on this site at all knows what a stand up guy he is! BUT, I did buy a Dennys drive shaft from him a year or so ago and the transaction went flawlessly. Fast e-mails, fast shipping, and everything was as advertised. Have no worries with this guy folks, his word is good.

-Teek

 

Not sure yet. Just decided to switch.

Rich

 

Rich

I am kinda interested in the 1.5's.LMK if the whole deal thing falls trough.

Thanks
Eric

 

Eric: no offers yet on the whole package. If that is still true tomorrow I will post each item individually.

Rich Krause

 

Sent you an email Rich.

 

I am interested in the lifters. Are they the Comp Cam "R" series for an LT 1 which retail for $208 or are they a higher performance lifter?
Thanks!

 

Rich,

I may be interested in the whole package.

Sending email now.

Madhu

 

Hey Rich, I'll take the whole package.

sent you mail
Jason

 

I can't check my email until this pm and will answer all inquiries then.

Thanks

Rich

 

Rich this cant be the right/same thread you originally posted. is this stuff all for sale still?