Going bigger better and stronger....
Thread Starter
Registered User
Joined: Sep 2002
Posts: 1,419
From: Coquitlam, British Columbia
Going bigger better and stronger....
.....I'm selling the following:
SY3500 - 400.00 usd
LS6 heads with Manley Valvetrain - 800.00 usd sale pending (Twitch)
228R cam - 300.00 usd
FLP headers complete - 1000.00 usd sale pending (Chris)
K&N FIPK - 160.00 usd
LS6 intake - 250.00 usd sale pending (Muff)
LS1 "loudmouth" - 170.00 usd
Baer bump steer rods ends - 140.00 usd
LS1 motor (block only) - don't know yet...going to 383 LS1 ARE EDIT: I need to send to block back
Baer GTP front brake set up - 1200.00 usd
....I'll be pulling everything apart after this weekend.
Thanks;
SY3500 - 400.00 usd
LS6 heads with Manley Valvetrain - 800.00 usd sale pending (Twitch)
228R cam - 300.00 usd
FLP headers complete - 1000.00 usd sale pending (Chris)
K&N FIPK - 160.00 usd
LS6 intake - 250.00 usd sale pending (Muff)
LS1 "loudmouth" - 170.00 usd
Baer bump steer rods ends - 140.00 usd
LS1 motor (block only) - don't know yet...going to 383 LS1 ARE EDIT: I need to send to block back
Baer GTP front brake set up - 1200.00 usd
....I'll be pulling everything apart after this weekend.
Thanks;
Last edited by sleeperZragtop; Jun 10, 2003 at 07:08 PM.
Registered User
Joined: Jun 2002
Posts: 2,696
From: British Columbia, Canada
Ive got to arange some financing so I can buy more stuff Give me another pm on the heads mike Im all over these
Do these include your vavetrain setup complete ?? I may go to the bank and get a loan so I can buy the brakes too
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
damn u rich people 
mike .. whatsup man !! get what u have down the track properly before ripping into pieces !!!
i think this is a syndrome that u and perry share ...
anyway .. good luck with yo shizznat
mike .. whatsup man !! get what u have down the track properly before ripping into pieces !!!
i think this is a syndrome that u and perry share ...
anyway .. good luck with yo shizznat
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
Originally posted by blue 79 Z/28
damn man, thats gonna be crazy! you keep going and payam might have to step up his combo
damn man, thats gonna be crazy! you keep going and payam might have to step up his combo
Thread Starter
Registered User
Joined: Sep 2002
Posts: 1,419
From: Coquitlam, British Columbia
Couple things...the LS1 modding feast has begun...soon everyone will be where I'm at right now..I can't have that. I'm getting the tranny pro-built with a higher stall and a stroker with stage III heads and cam. My suspension is alreay there..just need tires. As for the brakes.....6 piston Alcon ....so really all this stuff is for sale...but I need to know asap on the TC...if not I'm sending it to Yank and having it re-flashed to 3800
....so really all this stuff is for sale...but I need to know asap on the TC...if not I'm sending it to Yank and having it re-flashed to 3800
Registered User
Joined: Apr 2000
Posts: 555
From: Yakima WA
Mike,
Just some friendly advice, but don't bother with a stroker. Rather then spend the cash on a Big Bore resleeved block. Believe me it'll make more power that way. The stroker motors don't shine unless you put that stroker crank in a Big bore motor.
Good luck!
Just some friendly advice, but don't bother with a stroker. Rather then spend the cash on a Big Bore resleeved block. Believe me it'll make more power that way. The stroker motors don't shine unless you put that stroker crank in a Big bore motor.
Good luck!
