i bought autotap cause for a while now i felt my car wasnt 100% but could not figure out what, i ended up having 4 codes(ill get them later) and only knew of one. other then that all this **** is above my head for the most part and i need someone who knows what they are doing to take a look at it and tell me whats up and what needs to be fix. anyone in the area willing to take a look and help a fellow lt1'er out. thanx

 

Post up the codes and what you think is wrong with it...why don't you think it's 100% ?

 

i dunno, something just doesnt feel right, but i cant pin point it, and it only 275 with longtubes, ory, cai, and then with a madz28 tune and new opti/plugs/wires only made 271, but like i said something doesnt feel right. the codes were 3 for the no activity of the o2 sim on bank 2, which i had known about, and the other was some kind of reverse lock out or something like that(forgot to right it down) i think it was p0162 or soemthing like that. i just want to make sure everything is 100% before modding anymroe

 

Well as far as the rwhp goes, you could just have a weak car, there have been some that dyno very low 200's. Since you have an OBD2 car if there was trouble you would most likely get an SES light...check for vacuum leaks though since they can be killers to power.

 

i dunno, the car was pretty average stock, 250 at the rear wheels. i bought the autotap just to make sure there was nothing wrong with it.

 

If the car was 250 new, and with long tubes, cai, and a tune you are 275, although the results are not stellar you could be with acceptable range... There are a lot of variables to take into account. Take it to the track and see what it does. That will help quantify your performance more than another dyno run. Post up the results, along with incrementals and weather conditions.

 

im hoping to get up to the track, i dont know i might have expected to much, cause it just doesnt feel like its right.