I had a friend ask me a question about the TNT kits for the LT1's but I didnt have the answer and I figured I'd ask here.
Well, he saw that there are two separate fuel and nitrous lines leading to the TB plate and asked what would happen if one set of fuel and nitrous lines were disabled. Would that lead the power out put to be cut in half for ex. a 100 shot would be 50 if the one set of fuel and nitrous was disabled?

 

I cannot say for sure, but I believe it woud be a 50 per side. If someone knows for sure, I am interested too.

 

It sounds logical to me, but then again Im not the most learned person when it comes to nitrous.

Any other thoughts on this.

Hey johnsSS, nice times. Was that on the bottle or all motor?

 

Each nozzle would be set for a 50 shot. But it appears to me that if one of the nozzles were disabled, the distribution would be horrible, and you may not actually receive a 50 shot. The cylinder bank on the nozzle side that was still working, would get almost all of the nitrous/fuel mist, while the other bank would get almost nothing (especially the first 2 cylinders of that bank). Sounds like a time bomb to me.

 

Speedmiser,
Thanks for the reply. I really didnt think about the distribution of nitrous in relation to the nozzle. Something to think about.

 

to nuer:
These times are all motor, I'm planning on getting a TnT kit though!