No problem then Here's how it wires up:

Looking at the back of the switch you will see that the terminals are numbered instead of letters.

Pin 1 and 6: To vehicle ground
Pin 2: To Black Wire on Bottle Opener
Pin 3 and 4: To Keyed 12 V Power In
Pin 5: To Red Wire on Bottle Opener

On mine when i wired the vehicle + and - for pins 1 and 3, I made a 2 short wires with a push on terminal crimped on one end, then I stripped the other end of them and put one with the vehicle + and one with the vehicle - and then crimped a push on terminal on them. Sort of like this if it makes any sense


1 6
Y
_


3 4
Y
+

 

thanks. I'll take alook at it tonite. thanks to the other guy that I think had the same number. I didn't realize he was talking about the Nx switch panel.

thanks again. I'll update!

 

In the used kit I bought it has a small black box(about the size of a match box) with 3 wires and a small red light in it. what is that for and were do the wires go?

 

ok. That worked THANKS EVERYONE!